Log in
Register
Menu
Log in
Register
Home
What's new
Latest activity
Authors
Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Current visitors
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Satellite Tv Encryption Decryption
Cards, Programmers and Cams
X-CAM, Ultra CAM, Dragon CAM, Diablo, T Rex
My Cam won't upgrade
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mickha" data-source="post: 391796" data-attributes="member: 187442"><p>If the problem lies with your cam, due to a fake file, then it requires its bootloader to be repaired, which can only be done with a Cas 3, and some soldering skills, or use van hoofs services.</p><p>But if the bootloader is damaged them you usually get the cam not being recognised, your situation is completely different, where you seem to have full access to the cam, using the menu, so you can update the keys using the debug option.</p><p>I can't understand why it isn't going into Dragon loader mode when the card is inserted, which makes me think the problem might lie elsewhere, but without being able to check the file, your card, your programmer or your cam it is difficult to diagnose.</p><p>I am aware of a problem with the dynamite programmer and CIS 8.1b, to such an extent that I would recommend that you re-load the 7.9c drivers, this will mean you will have to change the date on your computer, just go back a couple of months, to use your programmer.</p><p>Then program your card with Predator 354, from dragonmodul, and see if that works.</p><p>If not we will have to go through the entire process of programming your loader card, and loading your cam to see if we can spot the problem.</p><p>Please post back with the results after attempting to program your card with the 7.9c drivers.</p><p>Good luck.</p></blockquote><p></p>
[QUOTE="Mickha, post: 391796, member: 187442"] If the problem lies with your cam, due to a fake file, then it requires its bootloader to be repaired, which can only be done with a Cas 3, and some soldering skills, or use van hoofs services. But if the bootloader is damaged them you usually get the cam not being recognised, your situation is completely different, where you seem to have full access to the cam, using the menu, so you can update the keys using the debug option. I can't understand why it isn't going into Dragon loader mode when the card is inserted, which makes me think the problem might lie elsewhere, but without being able to check the file, your card, your programmer or your cam it is difficult to diagnose. I am aware of a problem with the dynamite programmer and CIS 8.1b, to such an extent that I would recommend that you re-load the 7.9c drivers, this will mean you will have to change the date on your computer, just go back a couple of months, to use your programmer. Then program your card with Predator 354, from dragonmodul, and see if that works. If not we will have to go through the entire process of programming your loader card, and loading your cam to see if we can spot the problem. Please post back with the results after attempting to program your card with the 7.9c drivers. Good luck. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Satellite Tv Encryption Decryption
Cards, Programmers and Cams
X-CAM, Ultra CAM, Dragon CAM, Diablo, T Rex
My Cam won't upgrade
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top