need help,cccam does't work properly with irdeto

[kidjej]

hello guys, i have problems using irdeto card with cccam.it works fine after DB restart,but after a few hours not using my local irdeto card,it doesn't open any of the channels on my local card untill i do the reset.
my local card is s_x view 13E full, irdeto.

pay attention to my cccam cofig:
# SERVER LISTEN PORT : #
SERVER LISTEN PORT : 12000 # tvoj TCP port
# ALLOW TELNET INFO : #
ALLOW TELNETINFO: yes
# ALLOW WEB INFO : #
ALLOW WEBINFO: yes
# WEBINFO USERNAME : #
WEBINFO USERNAME : ****
# WEBINFO PASSWORD : #
WEBINFO PASSWORD : *****
# TELNETINFO USERNAME : #
TELNETINFO USERNAME :
# TELNETINFO PASSWORD : #
TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT : #
TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT : #
WEBINFO LISTEN PORT : 16001
# ZAP OSD TIME : #
ZAP OSD TIME :0
# OSD USERNAME : #
OSD USERNAME :****
# OSD PASSWORD : #
OSD PASSWORD :*****
# OSD PORT : #
OSD PORT :80
# SERIAL READER: /dev/sci0
# SERIAL READER : /dev/ttyUSB0 smartreader+ phoenix
# SMARTCARD WRITE DELAY: /dev/sci0 100
SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
# EMM Blocker #
# SHOW TIMING : #
SHOW TIMING : yes
# DEBUG : #
DEBUG : yes
# NEWCAMD CONF : #
NEWCAMD CONF : yes
# DISABLE EMM : #
DISABLE EMM : no
# EXTRA EMM LEVEL : #
EXTRA EMM LEVEL : yes
# Mini OSD #
MINI OSD : yes
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# BOX KEY #
# BEEF ID : #
# PIN : #
# SOFTKEY FILE : #
SOFTKEY FILE : /var/keys/SoftCam.Key
# AUTOROLL FILE : #
AUTOROLL FILE : /var/keys/AutoRoll.Key
# STATIC CW FILE : #
S

i was adviced to buy cardreader that works with irdeto (because irdeto cards work on 6 mhz and DB's cardreader works on 4-5 mhz), but i reached the conclusion that my card works very good on Gbox, so the talking about cardreader is not true.
i think that my problem lies in the CCCam config but i don't know how to fix it.

any ideas.

thanks

best regards

 

[sonic1]

Irdeto card and NDS cards perform much better when overclocked.
You have your card running at 6mhz which is the minimum for your Irdeto card.
Make small adjustments if you wish but many report the Irdeto card running fine up to 8.4mhz

Here is a quote from CCcam forum .

SMARTCARD CLOCK FREQUENCY: /dev/sci0 8200000 (irdeto 0.195 to 0.1370)

I would not maybe jump that far straight away but make small adjustment and keep an eye on the temperature of the chip.

 

[kidjej]

ok mate.

thanks a lot i will try overcklocking.

best regards