Newbie like to learn open

N

ndf9

Member
My Satellite Setup
Astra 19.2º
Hotbird 13º
Humax 1000 HD
Cas 3
T-Rex Twin
My Location
Portugal
Hallo (sorry for my bad english)
i have a Humax 1000 and a Cas 3 and a T-rxe Twin with Acces9 card.
I have read around in this Forum and follow some tips an check if i can enter de Hot chanel but it is not possibel.
wen i go to the menu from the Humax this reconize the FireKrypt 1.3 and the Cardnumber. And then i dont know wath i must do more.
I will learn to open Sky HD Italia by Astra 19.2º or some other, also Italia 1 Rai where also is encryptet from time to time and any channel also by Hotbird 13º.

Maybe the T-Rex is not the best maybe the Dragon card can Help me.
Can you show me any topic so i can learn How do?
I need for any channel a separat Card? Is the Humax 1000 good.
Can i open German Premiere HD?

Thanks if any body like to help
regards Nic
 
You cannot open Sky Italia - its totally secure

you want it = you pay for it
 
Ok thank's.

How i programm the access card 9 so i can youse with the T-Rex Twin?
 
So i think i buy the t-Rex but without the card loader.
Maybe for this i dont know wat to do.
I'm right?


Also how i can youse the Access card 9 with the Humax 1000?

Nic
 
Why i must talk alone?
Or i ask the wrong way?

Nic
 
Nic its been a day since you first posted. Dont be impatient - you need to to wait at least a week before asking questions again - remember not every memeber signs in every day.

Now one step at at time, just EXACTLY are you trying to do - theres plenty about T-Rex cams, Dragon cams etc in their dedicated section - plenty of "how to do it" info in there.
 
Ok i will be patient.
So this first more explaint questions.

Is necessarie to activate de Accesss Card 9 before i can youse it in the Humax 1000 with Astra 19.2 or Hotbird 13º? This one dose´nt work buit for a week. Or i can put it direct in the Receptor?

Need i a T-Rex card reloader or a Dragon reloader card to use with the T-Rex Twin Module and the Cas Interfacestudio 7.9c?
I buy one without the card, only Accesscard 9 incluet.

Can i decrypt the German Premiere and Prem HD? With my stuff?

I hope now that i have me explain better then in the first contact.

Thanks for all Nic

sorry one thing more; wath is a predator firmware and where i can find?
 
Hi ndf9,
Your access 9 card will give you access to a couple of adult channels (just insert the card to view), if you want to get the most from your cam you will require either a cam programmer or a loader card.
Rgds,
Rockbet
 
The access 9 card only opens INXTS on 13E or 10E, it isn't useful for anything else and I have seen owners giving them away as they prefer the mature content channels currently available with both Premiere and D+ packages.
As you have a Cas 3 you do not require a loader card as you can plug your Cam into the Cas 3 and load it using the latest Cas studio software.
Have you got the new T-Rex supermodule 4.6, or one of the earlier Dragon/T-Rex cams? As the newer 4.6 cam can also give you Cabo on 30W.
 
Hey thanks for the answers.

also i have a T-rex twin module powered by firecrypt.
But for my topic of the house position or locacion of the disk it is no possibel to have cabo.

So i have alternative only Astra 19.2 a nd Hotbird 13.

Do i need the predator firmware to used it with the T-rex and cas3? Where i can find.
Where i find the fils to upload to use with premiere or D+ so i can programm the T-rex?

I find som Tps.bin for the Humax wath is this?
Also some Key fils i need this?
My Humax hase the premiere onboard can i resolve with this keys?

Greatings Nic
 
Hi ndf9,
TPS bin is the file to open the TPS channels on 13E, this requires updating daily.
To get D+ and Premiere, using your Dragon Cam you need to input the latest keys, this can be done using your receivers remote control and entering the Cams menu, go to debug and OhlAladin, there you will find D+ and Premiere.
The keys need to be in dec format, 3 numbers, they are usually found in Dec format, a combination of numbers 0-9 and letters A-E, the can easily be changed using a key converter like Matrix Keyer, there is a similar tool in Editors, Utilities and miscellaneous downloads section, look for MR Hex to Dec Key Converter. The last official Predator firmware was version 3.54, whcih you can find via the Links Section, click on the Forum Tab, on the Home page and check the various sections.
Best wishes
Mickha
 
ok super and many thanks :-worship, so i have a lot work to do in the next days

by Nic
 
I´m back sooner.
So i have loaded the predasaurus 2.08 software in the t-rex but i can not find anything over the debbug and ohaladin. Is this a software? then in the menu from my Humax 1000 not apars, only inicialing Ci Module. And nothing more.
I meen when i conect the t-rex in the Humax only apears inicialing CI Module. Than i wait a few minutes but nothing more happen.

Wath is a security update?

Must i connect the Humax with the PC or only insert the T-rex?

Sorry and thank's
Nic
 
Wrong software if you have a basic T-Rex CAM. You need predator .dra files for that one.

Llew
 
Ok i have it and also find ohaladin must i chance all channels by hand, and how calculate with the Hex prog.?

One question?I find this in the forum wat is this with the Time and Date by the keys like 23.01.200 etc.?
Nic
 
Matrix Keyer -just put your hex file in the top box and click 'convert'.

Time and Date are the last known updated file.

Llew
 
I´m not find Premiere maybe then the Pemiere deco is incorporatet in the Humax 1000 Reciever, so maybe i will change.
With D+ i have 4 lines with Hex Numbers must i convert all and then put the new dec numbers in? and then is ok or must i power of or so?
If i Like SRG or so with a diferent Hex numbers (shorter) is it the same?
How can i have xxx channels with the T-rex?

By and thanks
Nic
 
Hi ndf9,
ther are 2 keys, key 00 with 2 lines,
Key 00-0
Key 00-1
and
key 01, with 2 lines
Key 01-0
Key 01-1
when the keys are released it will state which key it is, either 00 or 01, the latest, 25/1, are key 00.
The first half of the key is inputted into 00-0, the second half into 00-1.
Once you have tried it you will see how easy it is.
 
Hi Mickha
i have inputet the 00-0 and 00-1 keys line but i have no find any chance, evry Time the recpt. ask me for the Card connect up. Why?


I have found 1 thing more.

My T-Rex is vers. 4.1 is it this the problem?
 
Hi ndf9,
it is more likely your receiver that is causing the problem, has it been patched? If so you might have to turn the patch off.
 
Back
Top