Newbie question

W

wilson3010

Member
Is it possible to get the hexfile to upload onto my ice blue crypt for other adult channels.

And if so where.

And general decryption of channels as well.

Purley for test purposes
 
Look at 'Nobbly's Big Links Forum' in 'General Topics' and look for 'Toecutters Den' you will find what you are looking for there m8......it's against forum rules here to post hex files!....But if you have any problems connected to progging cards we can all help you and any other sat related glitches too...so come back once you have found what you are looking for m8 and we will get you up and running!
 
Many Thanks,

I've got some files from toecutters site.

But I tried putting the files onto a funcard 5 which it did.

But it's not uploading them onto the cam.

It's a ice blue cam with a technomate 5000 receiver.

Unless i'm doing something wrong

I set file 4.4flash to the flash and then external.bin which i have tried in both internal and external eeprom option

Forgot to say i'm using a infinity usb programer.
 
Ok try this.....place card in progger....detect card.....wipe/erase card....load flash file (from extracted file from zip in my documents).....load extEEP (dont worry about intEEP)....write to card....that should be ok ...that is unless file is the right type!
 
Still nothing

card rights ok but once its inserted into the ice-blue

there is nothing comes up to say it's updating or anything

am i missing something
 
O'k I have to admit I am not familuar with this cam as I am still using my STB embedded cam!......If you first check this link: http://www.duwgati.com/uk/index.htm Click on 'Software Tutorials' in the top left hand corner then scroll down and click on 'Infinity USB' , this tutorial should cover everything on progging the card for your CAM.....If that does not work then what I would recomend next is to start a new thread on this forum in the: 'Cams And Decoders' section and explain your problems there as someone may have already experienced the glitches you are encountering....alternatively have a look at these two threads on Toecutters den it might be a simular problem being solved to yours m8 http://64.235.50.126/~takula/forum/showthread.php?s=&threadid=47709
http://64.235.50.126/~takula/forum/showthread.php?s=&threadid=54196&highlight=icecrypt
 
You have to be a subscriber to Toes to view the forums
 
Good point hopper.....I took it for granted that wilson3010 was... as he has already been on Toe's downloading files m8.
 
Back
Top