Newcs web interface

[woodseaves]

Can anyone tell me exactly what to put in the address bar to access the newcs web interface.
Regards

 

[sonic1]

First you need to make sure you have the following in your newcs,xml

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>

Then to access it put your dreambox ip into your browser followed by :8080

Example
192.168.1.2:8080

You will then be asked for username and password
default is newcs for both, you can change this in the xml which you can see above.

 

[woodseaves]

Thanks Sonic, I thought that was the correct thing to do but it don't work for me. I've been trying now for over a week following 2 threads, one on the new wh**e card and the other on omnikey reader trying to get the new card to work. Nothing is working for me and I do not have a clue what to do next.

 

[sonic1]

Can you post your newcs.xml for me?

 

[woodseaves]

Taken from B16mcc, I've tried a few but no luck. I'm using newcs 1.66 + CCcam 2.11. I believe 1.67 is available but if it's not on the blue button I'm lost. If I knew how to delete Newcs then I would and start again. My new card is activated and works in its own box.


?xml version="1.0"?>


<newCSconfig>
<globals>
<listening-ip>192.168.*.*</listening-ip>
</globals>
<readers name="Card Readers">

<device>
<name>Lower Slot</name>
<type>Sci</type>
<node>/dev/sci0</node>
<mhz>358</mhz>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<blockc0>yes</blockc0>
<boxkey>********</boxkey>
<PTShandshake>yes</PTShandshake>
<crypto-special>yes</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>12001</newcamd_port>
<priority>round</priority>
</device>

<device>
<name>Top Slot</name>
<type>Sci</type>
<node>/dev/sci1</node>
<mhz>358</mhz>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<blockc0>yes</blockc0>
<boxkey>*******</boxkey>>
<PTShandshake>yes</PTShandshake>
<crypto-special>yes</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>12002</newcamd_port>
<priority>round</priority>
</device>

<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>

<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

<newcamdserver>
<enabled>Yes</enabled>
<name>NewCS</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>CCcam</name>
<password>CCcam</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
</newcamdserver>

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<accesslevel>admin</accesslevel>
</user>
</httpd>
</newCSconfig>

 

[Martinmc]

Make sure you have the username and password in this section of the file:

<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>adminuser</name>
<password>adminpassword</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
when you goto the page http://yourserver.ip.address:8080 you will need to logon as user adminuser , and password adminpassword