kingharvest
Member
- My Satellite Setup
- Sky +HD
- My Location
- UK
Hi, I have a _http://www.maplin.co.uk/directional-dome-5.8ghz-video-sender-kit-518136 . The ir has never worked with the sky hd box but i used an old IR from an old 2.4ghz sender i had which worked until it got hoovered up and broke. I needed a solution and found that if i bought a sky link i could make it work. So i bought one from ebay and connected it to the RF2 output in the back of my hd box. I then selotaped the nikkai ir receiver to the sky link so they were pointing at each other.
All worked well for a couple of weeks, I could happily change channels upstairs again but recently it's been very temperamental and now, the only way it works is if the sky remote is pressed against the nikkai receiver in the bedroom.
I've moved things around but no joy.
Has anyone got any advice? It's driving me mad! My first thought is that there is some dodgy equipment, either the receiver upstairs, the IR mouse or the sky link.
[warning] Live link disabled in accordance with Forum Rules[/warning]
All worked well for a couple of weeks, I could happily change channels upstairs again but recently it's been very temperamental and now, the only way it works is if the sky remote is pressed against the nikkai receiver in the bedroom.
I've moved things around but no joy.
Has anyone got any advice? It's driving me mad! My first thought is that there is some dodgy equipment, either the receiver upstairs, the IR mouse or the sky link.
[warning] Live link disabled in accordance with Forum Rules[/warning]
