I have recently purchases a DreamBox 500 s and after taking it home, i connected it to my router using a Cat5 cable to my Belkin FSD 9630-4
Worked for 20 minutes, switched channels, and it has stopped working since.
I set up the network manually on the dreambox, could not screen grab and my ping results range between 50% packet loss to 100% (most cases)
the communication setup is as follows
IP 192.168.2.24
netmask 255.255.255.0
Type LAN
Nameserver : same as primary DNS from my router
Gateway: 192.168.2.1
i have changed these setting to go through everything mentioned, My router address on both nameserver and gateway.
disabled firewall, Upnp on router. the moment i did this a picture showed froze, and upon rebooting didnt come back.
sometimes i check the time using internet, it works sometimes, doesnt work other times.
I have taken my dreambox to a friend who has bought the same box with the same pre-setup and used it in his house it worked perfectly without changing anysetting (except for auto-dhcp), took it back to my place didnt work.
i tried 2 other routers, a 3com WL-552, and a thomson neither changed a thing. My friends router is really old, i have no idea what it is.
My internet connection is ADSL, and when i connect the cable (same on on my dreambox) to my laptop, my laptop connects to the net, so its not the cable.
I've even placed the DreamBox in the DMZ , but no change.
I have been trying relentlessly to understand and read through the forum but to no avail so i am stuck with a device that isnt working + hair pulling (not much left)
Worked for 20 minutes, switched channels, and it has stopped working since.
I set up the network manually on the dreambox, could not screen grab and my ping results range between 50% packet loss to 100% (most cases)
the communication setup is as follows
IP 192.168.2.24
netmask 255.255.255.0
Type LAN
Nameserver : same as primary DNS from my router
Gateway: 192.168.2.1
i have changed these setting to go through everything mentioned, My router address on both nameserver and gateway.
disabled firewall, Upnp on router. the moment i did this a picture showed froze, and upon rebooting didnt come back.
sometimes i check the time using internet, it works sometimes, doesnt work other times.
I have taken my dreambox to a friend who has bought the same box with the same pre-setup and used it in his house it worked perfectly without changing anysetting (except for auto-dhcp), took it back to my place didnt work.
i tried 2 other routers, a 3com WL-552, and a thomson neither changed a thing. My friends router is really old, i have no idea what it is.
My internet connection is ADSL, and when i connect the cable (same on on my dreambox) to my laptop, my laptop connects to the net, so its not the cable.
I've even placed the DreamBox in the DMZ , but no change.
I have been trying relentlessly to understand and read through the forum but to no avail so i am stuck with a device that isnt working + hair pulling (not much left)