OCTAGON SF8008 E2 4K UHD

I will test it at the weekend, I have to manage multiboot. So if i understand. I need download new built of Open ATV + I need to place blindscan plugin into usr/bin folder? This plugin will not be updated directly in image? Thank you for good news!
 
Huevos said:
The whole point of blindscan is it scans the unknown transponders. If you want the known transponders just do a normal manual scan.
Click to expand...
Yes off course, I mean I have seen testing blind scan not finding anything or very little on sats where a lot transponders were active. So even the known transponders couldn't be found, so what unknown transponders weren't found? You'll never know. But I meant it as means of test. If a blindscan can't even find the already known signals what's the reliability in finding new/changed transponders?

ocean04 said:
Blindscan finds SR >= 1000
SR 874 works (don't believe much lower than that..)
Click to expand...
That's way to high. To bad if blindscan can't scan below 1000, but I can understand that that's difficult and can live with that.
But in a manual scan a DM920 (which I believe has the same tunerchip?) could find as low as 285. (Astra 3B, 23.5°E, 12647 V, Antenne Düsseldorf).

And how is the representation of the signal strength now? I believe in earlier softwareversions there were issues with that?
It is necessary for fine-tuning a movable dish via vbox+actuator.
 
Hi! I just tested blindscan with 8/1 switch on Open ATV 6.2 from 17.1.2019 and i have to say, that IT WORKS!! No blindscan problems on DiseqC 1.1 observed! Big Thank You!
 
HDR HLG in Infobar with Driver Update 18-01-2019



See Photos:
 

Attachments

  • 0000infoueber.webp
    0000infoueber.webp
    116.8 KB · Views: 46
  • 1hdrhlg001 (1).webp
    1hdrhlg001 (1).webp
    146.2 KB · Views: 46
  • 1hdrhlg001 (2).webp
    1hdrhlg001 (2).webp
    128.8 KB · Views: 34
  • 1hdrhlg001 (3).webp
    1hdrhlg001 (3).webp
    66.5 KB · Views: 33
  • 1hdrhlg001 (4).webp
    1hdrhlg001 (4).webp
    198 KB · Views: 35
  • 1hdrhlg001 (5).webp
    1hdrhlg001 (5).webp
    66.6 KB · Views: 36
  • 1hdrhlg001 (6).webp
    1hdrhlg001 (6).webp
    147.3 KB · Views: 34
  • 1hdrhlg001 (7).webp
    1hdrhlg001 (7).webp
    114.4 KB · Views: 36
  • 1hdrhlg001 (8).webp
    1hdrhlg001 (8).webp
    248.3 KB · Views: 35
  • 1hdrhlg001 (9).webp
    1hdrhlg001 (9).webp
    145.2 KB · Views: 47
Could someone test my skin on SF8008 to see if they appear too?
 
Love it, thanks!!!
 
T2-MI (T2MI) PLP Direkt Scan Support OCTAGON SF8008

ab Treiber (Driver from) 29.01.2019

Siehe Bilder (See Photos):

Getestete Satelliten (Tested Satellites):
- 4.9E ZeonBud
- 40E TP`s: 3665, 3685, 3915, 3767, 3779
- 40.5W: 4000

Treiber + E2 Images in den kommenden Tagen.
Driver + E2 Images in the coming days.
 

Attachments

  • 1_t2mi-test-sf8008.webp
    1_t2mi-test-sf8008.webp
    118.4 KB · Views: 31
  • 2_t2mi-test-sf8008.webp
    2_t2mi-test-sf8008.webp
    94.3 KB · Views: 31
  • 3_t2mi-test-sf8008.webp
    3_t2mi-test-sf8008.webp
    79.2 KB · Views: 29
  • 4_t2mi-test-sf8008.webp
    4_t2mi-test-sf8008.webp
    83.9 KB · Views: 27
FINALLY!!!!
What should have been there a long time ago is now a reality!!!! T2-MI decapsulation as an Enigma2 process with patches for t2mi_decap parameters!!!
 
Yes, essentially what astra-sm does as a separate streaming agent has now been intergrated into the Enigma2 system with stdout returning as a source in service scan. What I've been saying since T2-MI was firstly introduced to Enigma2. SF8008 users will be very happy as the first recipients!
And not only that, this implementation is a beginning to endless possibilities as well!

@scopus I can't wait for you and other users to try it on Zeonbud, and everything else T2-MI receivable (53E, 80E, 40E etc).
 
If it's done as I suspect it was done, yes! If not, no, at least not yet! Let's hope I'm right!
 
Do we need a total reflash? As I could not see the T2MI option after an online update, and blind scan also crashes on start up
 
Back
Top