remlap
Specialist Contributor
- My Satellite Setup
- Gibertini 104cm motorised dish with a Technomate 5402 HD CI+ and TBS 6925 + Gibertini 90cm with 9E 13E 19.2E and 28.2/5E with a Hauppauge WinTV NOVA-HD-S2 Media Centre PC and Pure EVOKE Flow Radio + 100cm Channel Master with 2 LNBs at 24.5W and 30W
- My Location
- Wales
Was browsing LIDL site to see if their annual satellite gear specials have appeared and noticed from today they had a Brother P-Touch 1230PC labeller that connects to a computer via USB for £25. Normally thy retail in the £40 mark.
_http://www.lidl.co.uk/cps/rde/xchg/lidl_uk/hs.xsl/index_28223.htm
Picked one up from my local LIDL, downloaded the P-Touch Editor and connected then tried it out with the extended editing software, there is also a built in lite version that needs no installation and toggles between the two with a switch on the back.
Here is a screenshot of the software in use I made up another label for the adjustment bolt for my CM Polar Mount, the software allows me to exact size any image and text and with it being laminated Brother say they're very resistant.
Planning on labelling cable ends, especially useful for me on my diseqc switches.
From first use its a bargain in my opinion.
Cheers
_http://www.lidl.co.uk/cps/rde/xchg/lidl_uk/hs.xsl/index_28223.htm
Picked one up from my local LIDL, downloaded the P-Touch Editor and connected then tried it out with the extended editing software, there is also a built in lite version that needs no installation and toggles between the two with a switch on the back.
Here is a screenshot of the software in use I made up another label for the adjustment bolt for my CM Polar Mount, the software allows me to exact size any image and text and with it being laminated Brother say they're very resistant.
Planning on labelling cable ends, especially useful for me on my diseqc switches.
From first use its a bargain in my opinion.
Cheers