captain123
Member
- My Satellite Setup
- Dreambox
- My Location
- Bulgaria
Hi does anyone have a copy of Pace MSP990/991 Satellite Positioner Service Manual or Owner's Manual please ?
Pace MSP990/991 Service Manual
- Thread starter captain123
- Start date
Vipersan
Emmett Browns Ghost
- My Satellite Setup
- IP9000HD +
TD110 Dish and TD88 Dish in Tandem
66°East to 60°West.
AZbox PrmHD + OpnbxS9HD + Skybox + DrHD F15
2x VboxII AZ-EL
2 m+ Alcoa PF + BSC421 C-Band lnbf...
+SS2/TwHnS2-3200 pci/TBS6925 pci
1.5 Fortec Star -Gbox - HtoH Ku/Ka/C
- My Location
- UK
Can't help with the manual Captain...
but if its just 'how to use it' info you need ..
maybe this will help
rgds
VS
>>
To set east limit stop:
Press the 'Mode' key followed by the '2' key to enter Limit Set Mode.
Move the dish to desired east limit position using 'East' key.
Press the 'Store' key.
The 'L1 Set' message on the unit front panel will confirm the setting.
To set the west limit stop:
Move the dish to desired west limit position using the 'West' key.
Press the 'Store' key.
The L2 Set' message on the unit front will confirm setting.
The unit will now proceed to clear any stored satellite positions.
The 'Norm' , 'Prog' and 'Limit' indicators will illuminate then extinguish after a short time with the unit returning to Normal Mode.
To prevent the clearing of positions, press the 'Mode' key immediately after the 'L2 Set' message to return to Normal Mode.
Above information kindly supplied by Joe McIntyre
>>
but if its just 'how to use it' info you need ..
maybe this will help
rgds
VS
>>
To set east limit stop:
Press the 'Mode' key followed by the '2' key to enter Limit Set Mode.
Move the dish to desired east limit position using 'East' key.
Press the 'Store' key.
The 'L1 Set' message on the unit front panel will confirm the setting.
To set the west limit stop:
Move the dish to desired west limit position using the 'West' key.
Press the 'Store' key.
The L2 Set' message on the unit front will confirm setting.
The unit will now proceed to clear any stored satellite positions.
The 'Norm' , 'Prog' and 'Limit' indicators will illuminate then extinguish after a short time with the unit returning to Normal Mode.
To prevent the clearing of positions, press the 'Mode' key immediately after the 'L2 Set' message to return to Normal Mode.
Above information kindly supplied by Joe McIntyre
>>
- My Satellite Setup
- Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
- My Location
- The Flatlands of East Anglia
captain123 said:
I have a MSP990 User Guide if that's any help. Although Vipersan's instructions should do the job.
captain123
Member
- My Satellite Setup
- Dreambox
- My Location
- Bulgaria
Llew said:
Thank you Liew, I have downloaded all 5 screenshots you posted for the MSP990/991 positioner which was extremely helpful - is that the complete user manual by the way ? Thank you Vipersan as well, this info is the most important one that will take you through the positioner setup. However I do need a Service Manual, does anyone have a copy for MSP990/991 ?
Lexzie
Member
- My Satellite Setup
- Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E/13E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
- My Location
- The Netherlands
Can anyone post the manual again?
LMGTFY gives this:
Does that help?
Edit, and this one (better scan quality?): PACE MSP 995 USER MANUAL Pdf Download
Greetz,
A33
Does that help?
Edit, and this one (better scan quality?): PACE MSP 995 USER MANUAL Pdf Download
Greetz,
A33
- My Satellite Setup
- Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
- My Location
- The Flatlands of East Anglia
Or there's the User Guide pages I originally posted - plus missed page -
Last edited:
Lexzie
Member
- My Satellite Setup
- Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E/13E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
- My Location
- The Netherlands
Thanks everyone, I didn't see the other post.