s-band
Member
- My Satellite Setup
- 1.5m IRTE PF, Invacom SNF-031, TBS6983,
Various L, S, C, X & Ka bits. 1.2m S/X/Ku/Ka Prodelin on Az-El (being refurbished), 1.8m Precision PF with Bullseye Ku LNB or various C & X bits
- My Location
- Essex
can you please check and share updated status
can you please check and share updated status
Paksat MM1 Updated Cband Footprint Added on Website
Now C Band Coverage All over Europe.
View attachment 160654
IRIB MUX Testing on Paksat MM1
3900 H 27500
4-5 db signal difference between this tp and Paksat 1R. (1.8m dish Pakistan)
View attachment 160655
It was showing signal on the Combo, but below lock for me too..This is not too strong with me in Central UK on my 2.2m PF and needs about an extra 2.5dB to lock - any C-bander's in the UK managing to get a lock ?.
It was showing signal on the Combo, but below lock for me too..
To be honest John, that was on my circular LNB arrangement, I need to try my linear LNB on it.Ok, thanks C, i think that little footprint spur from the main footprint is just a little bit too weak for us in the UK at the moment
This is not too strong with me in Central UK on my 2.2m PF and needs about an extra 2.5dB to lock - any C-bander's in the UK managing to get a lock ?.
I do not have the Green Lad on 38E at the moment, it is strapped up for Ku-Band. As soon as I switch it over to C-Band I will have a look.
The new footprint map does not seem to indicate stronger signal levels in the UK compared to the older map. The foorprint has changed only slightly via the addition of a narrowish European corridoor that was not present previously if I recall correctly?
Is that 3900H still active (Flysat lists it as 3898R, circular?) Getting 0 here. Only lock here is 3717V, 3m, outside footprint.
What about ku-band? SF8008 supreme blindscan finds one TP 11104V 3214 here. But it's only 1.4db
I think these two GSE data streams are also from this satellite position - and still active:There is no TP active on Paksat MM1 currently.