Log in
Register
Menu
Log in
Register
Home
What's new
Latest activity
Authors
Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Current visitors
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Satellite TV receivers & systems support forums
Receiver software, international Section
please help me upgrade one EUROSTAR Eurobox-9700
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="gsmsikar" data-source="post: 43703" data-attributes="member: 177587"><p>eurostar log with hyper terminal and null modem cable when connected with pc with 9700fta_new software </p><p></p><p>please help me now</p><p></p><p></p><p></p><p>Sector 7FF60000 Erase, Porgram OK</p><p>pgm blk=12, bufPtr=40080018</p><p>Sector 7FF80000 Erase, Porgram OK</p><p>pgm blk=13, bufPtr=400a0018</p><p>Sector 7FFA0000 Erase, Porgram OK</p><p>pgm blk=14, bufPtr=400c0018</p><p>Sector 7FFC0000 Erase, Porgram OK</p><p>pgm blk=17, bufPtr=403fbbf8</p><p>Sector 7FFF4000 Erase, Porgram OK</p><p>Restart...........>>>>>>>>>></p><p>Viacess DVB Boot Ver 1.00a Mar 20 1999 at 15:26:59</p><p>CPU - ST20TP3</p><p>Flash 2M, DRAM 4M, MPEG SDRAM 2M, C/I, External Modem.</p><p>key : 0x3</p><p>Jump to Main</p><p>Initialising Flash ...</p><p>Flash init ..</p><p>OnChip flash = 403ffe38 size: 0xc8</p><p>Flash init ....... OK!!!</p><p>Flash init ..EVAL-STB4 Reference Firmware</p><p>Version 1.2 of Oct 17 2000 at 16:37:16</p><p>Update -> Oct 17 2000</p><p>Initialising I2C ...</p><p>=> i2c init ok...</p><p>=> pti init ok...</p><p>Initialising PWM ...</p><p>Clock Recovery/PWM init: OK</p><p>Initialising Load Flash ...</p><p>Init flash home channel</p><p>check sum : 1f74</p><p>current NIT version = 0</p><p>Initialising OSD ...</p><p>********************************</p><p>*** STB FLASH Version : 9040 ***</p><p>*** S/W FLASH Version : 9040 ***</p><p>********************************</p><p>FLASH memory channel(psi) data is OK</p><p>Standard TV RGB Off</p><p>RF => PAL BG</p><p>RF Data : ca88 48 25 f4</p><p>884825f4Initialising the Digital Video Encoder</p><p>STV0119 Encoder ->PALBG, RGB</p><p>ttxt reg[34]=0x00, reg[35]=0x00, reg[38]=0x00, reg[45]=0x00</p><p>STV0119 Encoder configured</p><p>Initialising the STi3520A</p><p>Initialising 3520 Loop 0</p><p>Initialising PLL</p><p>Done !.</p><p>3520A initialised for ES decode only</p><p>3520A initialised for full PES decode</p><p>STi3520 V</p><p>STi3520 A</p><p>>>>>>>>>>>>>>>>>>>>>Initialising the 3520A C Version.</p><p>Setting up the mpeg video interrupt</p><p>Setting up the mpeg audio interrupt</p><p>Start mpeg audio packet management process</p><p>Starting the mpeg iic traffic management process</p><p>Starting the mpeg audio sync play start process</p><p>=> mpeg init ok...</p><p>Initialising the gprim library</p><p>Testing block move engine</p><p>=> gprim init ok...</p><p>ver=0,sn=0</p><p>Initialising Ttxt ...</p><p>Teletext driver library v1.0 - Version of Oct 17 2000 at 12:17:14</p><p>Initialising TABLE .................</p><p>'teletext_handlThe 'teletext_data_transfer' task is running</p><p>er' task is running</p><p>PAT PROCESS CREATE OK.....</p><p>PAT process started</p><p>PMT PROCESS CREATE OK.....</p><p>PMT process started</p><p>table buffer : 0x40058c00 size : 2048</p><p>SDT PROCESS CREATE OK.....</p><p>SDT process started</p><p>table buffer : 0x40057bf0 size : 4096</p><p>NIT PROCESS CREATE OK.....</p><p>NIT process started</p><p>table buffer : 0x40056bd0 size : 4096</p><p>CAT PROCESS CREATE OK.....</p><p>CAT process started</p><p>table buffer : 0x400563c0 size : 2048</p><p>B_PMT PROCESS CREATE OK.....</p><p>Background PMT task start</p><p>table buffer : 0x400553a0 size : 4096</p><p>B_CAT PROCESS CREATE OK.....</p><p>Background CAT task start</p><p>table buffer : 0x40054390 size : 4096</p><p>=> TABLE init ok...</p><p>table buffer : 0x40053370 size : 4096</p><p>Initialising TUNER .................</p><p>I2C front init ok.</p><p>disable back PMT</p><p>disable back CAT</p><p>Global Front I2C Reset</p><p>Tuner Init Start</p><p>Lsi 64724 sync byte ok!</p><p>LSI64724 init ok.</p><p>Tuner Init Process ok</p><p>LSI Tuner Process Created</p><p>DisEqC process start ok</p><p>DiSEqC Process ok</p><p>Change TR 0 = 1358.0MHz</p><p>=> TUNER init ok...</p><p>LNB_H/W On</p><p>LNB on</p><p>Initialising Front IR ...</p><p>Initialized KEY SCAN & Display Process!</p><p>Start 7-seg Display Process!</p><p>Initialized IR handler!</p><p>=> front_ir init ok...</p><p>smart card driver memory allocation Success</p><p>smart card driver memory allocation1 Success</p><p>card 1 is null!!</p><p>service_process_params is OK!!</p><p>smart card driver memory allocation3 Success</p><p>Service Process is initialized</p><p>ASC interrupt is initialized</p><p>ASC interrupt is initialized confirm</p><p>smart card detect interrupt is initialized</p><p>smart card driver memory allocation Success</p><p>smart card driver memory allocation1 Success</p><p>service_process_params is OK!!</p><p>smart card driver memory allocation3 Success</p><p>Service Process is initialized</p><p>ASC interrupt is initialized</p><p>ASC interrupt is initialized confirm</p><p>smart card detect interrupt is initialized</p><p>Initialising Viaccess ...</p><p>TABLE VERSION PROCESS CREATE OK</p><p>table version monitor started !!!</p><p>Ok to create smart card process</p><p>smart card detect monitor task started...</p><p>smart card init monitor task started...</p><p>smart card i/o monitor task started...</p><p>pi_program_client_register was called => OK</p><p>Viaccess version 100.v412 compiled on Aug 11 1999:18:04:31</p><p>VIACCESS init OK !!!</p><p>recover</p><p>22k Off</p><p>hor</p><p>Fi:1025 Fd:0 Si:28 Sd:0 V:4</p><p>Change_Frequency=>TS:1</p><p>PTI_PAUSE</p><p>^^^ tr:1 sat:2.0 ^^^</p><p>Reset LNB offset(0)= -500 KHz</p><p>Initialising CI ...</p><p>=================================================================</p><p>DVB Common Interface Version : 1.00.03 JULY/25/2000</p><p>=================================================================</p><p>Current H/W, S/W, Compile mode.</p><p>CAM VCC/VPP control.</p><p>CPU ST20TP3.</p><p>CAM interface : SAMSUNG PALCE22V10H.</p><p>1 SLOT.</p><p>=================================================================</p><p>Ci task create ok</p><p>CI process start!>>>>>>>>>>></p><p>Ci timer task create ok</p><p>Ci Link layer task create ok</p><p>=> CI init ok...</p><p>Initialising TASK ...</p><p>ver</p><p>Ok to create My_ch_change process...</p><p>My_ch_change process: Started</p><p>Ok to create My_downloadAll process</p><p>My_download All process: Started</p><p>Ok to create TDT process</p><p>TDT process started</p><p>Ok to create EIT task ...</p><p>start DVB EIT download task ...</p><p>EIT process started</p><p>table buffer : 0x40050aa0 size : 2048</p><p>ForcePowerOff()</p><p>DVB EIT structure size 228</p><p>table buffer : 0x4004fa60 size : 4096</p><p>=> SLOT[46] was flushed</p><p>======== SLOT DEALLOCATION =========</p><p>max event is 2047</p><p>=> SLOT[45] was flushed</p><p>Waiting EIT packet ...</p><p>EIT aborted</p><p>disable EIT</p><p>EIT stoped ok</p><p>disable TDT</p><p>TDT stoped ok</p><p>PTI_PAUSE(SLOT OFF)</p><p>=> viaccess deactivated</p><p>OSD> POWER_FAILURE_PROG_FLASH</p><p>Compare RAM & FLASH -> Same!!!</p><p>LNB off</p><p>ver</p><p>22KHz Off</p><p>PAL_NTSC.... process start....</p><p>Initialising user i/f =></p><p>start DBS_usif_task ...</p><p>usif process created successfully</p><p>*** Eurostar logo on....USER I/F OK</p><p>Eurostar CI DVB ver 1.10 Jan 12 1999 at 03:00:42</p><p>Ram Clear</p><p>Check Sum EA26 OK</p><p>Jan 12 1999 at 03:00:42</p><p>Start add=0x7FF3AE58, End add=0x7FFDFFFF</p><p>Start sector = 9, End sector = 14</p><p>Valid Sector. So write Magic</p><p>pgm blk=17</p><p>Sector 7FFF4000 Erase, Porgram OK</p><p>pgm blk=9</p><p>Sector 7FF20000 Erase, Porgram OK</p><p>pgm blk=10</p><p>Sector 7FF40000 Erase, Porgram OK</p><p>pgm blk=11</p><p>Sector 7FF60000 Erase, Porgram OK</p><p>pgm blk=12</p><p>Sector 7FF80000 Erase, Porgram OK</p><p>pgm blk=13</p><p>Sector 7FFA0000 Erase, Porgram OK</p><p>pgm blk=14</p><p>Sector 7FFC0000 Erase, Porgram OK</p><p>pgm blk=17</p><p>Sector 7FFF4000 Erase, Porgram OK</p><p>Eurostar CI DVB ver 1.10 Jan 12 1999 at 03:00:42</p><p>Exist SW</p><p>Initialising Flash ...</p><p>AMD FLASH Found!!!</p><p>FLASH Init OK!!!</p><p>anon flash32.c 387> Flash init ..</p><p>Initialising PWM ...</p><p>EVAL-STB2 Reference Firmware</p><p>anon pwm.c 140> Clock recovery/PWM init</p><p>Version 1.2 of Aug 10 2000 at 14:29:57</p><p>update -> Aug 10 2000 14:29:57, 20</p><p>Initialising Demux ...</p><p>anon demux.c 1864> demux_init: Demux Aug 10 2000 14:26:48 ST20TP2.</p><p>anon demux.c 2086> demux_init: Internal memory high = 6736</p><p>anon demux.c 2092> demux_init: OK</p><p></p><p>Initialising I2C ...</p><p>Initialising Load Flash ...</p><p>Init flash home channel</p><p>check sum : 4251</p><p>current NIT version = 0</p><p>Initialising OSD ...</p><p>********************************</p><p>*** STB FLASH Version : 8060 ***</p><p>*** S/W FLASH Version : 8060 ***</p><p>********************************</p><p>FLASH memory channel(psi) data is OK</p><p>Standard TV RGB Off</p><p>RF => PAL BG</p><p>RF Data : ca88 48 25 f4</p><p>884825f4</p><p>Initialising ST20 Sytem Layer ...</p><p>anon mpeginit.c 287> Initialising the Digital Video Encoder</p><p>anon iicvideo.c 135> STV0119 Encoder ->PALBG, RGB</p><p>ttxt reg[34]=0x00, reg[35]=0x00, reg[38]=0x00, reg[45]=0x00</p><p>anon iicvideo.c 194> STV0119 Encoder configured</p><p>anon mpeginit.c 290> Initialising the STi3520A</p><p>anon mpeginit.c 1614> Initialising 3520 Loop 0</p><p>anon mpeginit.c 143> Initialising PLL</p><p>Done !.</p><p>anon mpeginit.c 1116> 3520A initialised for ES decode only</p><p>anon mpeginit.c 1152> 3520A initialised for full PES decode</p><p>anon mpeginit.c 295> STi3520 V</p><p>>>>>>>>>>>>>>>>>>>>>Initialising the 3520A C Version.</p><p>anon mpeginit.c 297> STi3520 A</p><p>anon mpeginit.c 370> Setting up the mpeg video interrupt</p><p>anon mpeginit.c 373> Setting up the mpeg audio interrupt</p><p>anon mpeginit.c 379> Starting the mpeg video packet management process</p><p>MpegVideoPacketManager datapipe.c 128> Starting the mpeg audio packet management</p><p>process</p><p>anon mpeginit.c 397> Starting the mpeg audio packet management process</p><p>MpegAudioPacketManager datapipe.c 187> Audio packet consumer process: Started</p><p>anon mpeginit.c 415> Audio packet consumer process: Started</p><p>anon mpeginit.c 431> Starting the mpeg audio sync play start process</p><p>Initialising Gprim ...</p><p>anon gprim.c 52> Initialising the gprim library</p><p>anon gprim.c 55> Testing block move engine</p><p>ver=0,sn=0</p><p>TV/RGB off</p><p>Power LED off</p><p>Initialising Front IR ...</p><p>Start 7-seg Display Process!</p><p>anon front_ir.c 1345> Initialized KEY SCAN & Display Process!</p><p>anon front_ir.c 1351> Initialized IR handler!</p><p>LNB_H/W On</p><p>Initialising SFILTER ...</p><p>section_init: OK</p><p>demux_make_circulist ok</p><p>demux_set_buffer ok</p><p>Initialising TABLE ...</p><p>Initialising TUNER ...</p><p>anon qpsk724.c 1159> Global Front I2C Reset</p><p>anon qpsk724.c 1180> Tuner Init Start</p><p>Lsi 64724 sync byte ok!</p><p>LSI64724 init ok.</p><p>Tuner Init Process okated</p><p>LSI Tuner Process Created</p><p>DiSEqC Process ok</p><p>DiSEqC Process ok</p><p>00[KHz]</p><p>Change TR 0 = 950000[KHz]</p><p>Initialising Private ...</p><p>Initialising Ttxt ...</p><p>anon ttxt.c 180> Setting up Teletext Interface interrupt</p><p>anon ttxt.c 189> Starting the Teletext Driver process</p><p>Initialising USIF ...</p><p>anon ttxt.c 200> Starting the Teletext Send process</p><p>*** Eurostar logo on....*** Eurostar logo on....*** Eurostar logo on....TTXT Odd</p><p>enable</p><p>!!!! Fs : 90MHz !!!! Ts : 58mSec 2</p><p>micro code download start...</p><p>micro code download complete!!</p><p>!!!! Fs : 90MHz !!!! Ts : 56mSec 2</p><p>Chan data status : BOTH_CHAN</p><p>QPSK_Change_Channel start</p><p>=>F:973 S:29 V:4</p><p>22k Off</p><p>12V Off</p><p>hor</p><p>OP_Mode : 0</p><p>Orbit_pos : 2</p><p>Repeat : 170</p><p>High_Low : 0</p><p>Polarity : 0</p><p>ver</p><p>Switching On DiSEqC</p><p>hor</p><p>Change_Frequency=>TS:0</p><p>!!!First!!! channel_index 0, actual_channel 1</p><p>actual_prog_index 0, AV_Chan_Flag 1</p><p>^^^ tr:0 sat:2.0 ^^^</p><p>Change Freq(1) = 973000 [KHz]</p><p>Reset LNB offset(0)= -901 KHz</p><p>actual = 972099 [KHz] !!!! Fs : 90MHz !!!! Ts : 53mSec 2</p><p>OP_Mode : 0</p><p>Orbit_pos : 2</p><p>Repeat : 170</p><p>High_Low : 0</p><p>Polarity : 0</p><p>ver</p><p>Switching On DiSEqC</p><p>hor</p><p>Change Acq(2) = 973000 [KHz]</p><p>OP_Mode : 0</p><p>Orbit_pos : 2</p><p>Repeat : 170</p><p>High_Low : 0</p><p>Polarity : 0</p><p>ver</p><p>Switching On DiSEqC</p><p>hor</p><p>Change Acq(2) = 976000 [KHz]</p><p>OP_Mode : 0</p><p>Orbit_pos : 2</p><p>Repeat : 170</p><p>High_Low : 0</p><p>Polarity : 0</p><p>ver</p><p>Switching On DiSEqC</p><p>hor</p><p>Change Acq(2) = 970000 [KHz]</p><p>OP_Mode : 0</p><p>Orbit_pos : 2</p><p>Repeat : 170</p><p>High_Low : 0</p><p>Polarity : 0</p><p>ver</p><p>Switching On DiSEqC</p><p>hor</p><p>Lock Fail, but Init CI!!!!!!</p><p>================================================================</p><p>Common Interface Version : 1.00.02 OCT/01/1999</p><p>================================================================</p><p>TSI_bypass()</p><p>CI_defualt_state()</p><p>Created CI Timer_Process!</p><p>Start CI Timer Process!</p><p>TSI_bypass()</p><p>TSI_bypass()</p><p>CI_defualt_state()</p><p>cess!</p><p>Created CI_link_Process!</p><p>Initialising TASK ...</p><p>ver</p><p>Change Acq(2) = 979000 [KHz]</p><p>Switching On DiSEqC</p><p>My_ch_change process: Started</p><p>My_download All process: Started</p><p>My_download All process: Started</p><p>start DVB EIT Parsing</p><p>start DVB EIT Parsing</p><p>my_check_active process: Started</p><p>DVB EIT structure size 228</p><p>DVB EIT structure size 228</p><p>DVB EIT structure size 228</p><p>max event is 2015</p><p>ite mode</p><p>Set TV 4:3 Composite mode</p><p>CH NO: 1, EWTN prg id 0x11f9</p><p>QPSK_Change_Channel start</p><p>=>F:973 S:29 V:4</p><p>22k Off</p><p>12V Off</p><p>hor</p><p>same Diseqc control in channel change , so just jump by ljch</p><p>Change_Frequency=>TS:0</p><p>^^^ tr:0 sat:2.0 ^^^</p><p>Change Freq(1) = 973000 [KHz]</p><p>Reset LNB offset(0)= -901 KHz</p><p>actual = 972099 [KHz] act_prog_idx : 0</p><p>check card ok</p><p>PGM P=03e9 V=03e9 A=04b1</p><p>Set Teletext data 44d</p><p>RF => PAL BG</p><p>RF Data : ca88 48 25 f4</p><p>884825f4Power LED on</p><p>Created pal_ntsc monitor process.</p><p>root_process main.c 745> No errors during initialisation</p><p>Created trap monitor process.</p><p>Created trap monitor process.</p><p>STTBX_Init()=Ok</p><p>STAVMEM_Init()=Ok</p><p>STAVMEM_CreatePartition()=Ok</p><p>STEVT_Init()=Ok</p><p>STI2C_Init()=Ok</p><p>PTI_Init()=Ok</p><p>STE2P_Init=Ok</p><p>STflash_Init=Ok</p><p>STFlash_Open Ok</p><p>Ok</p><p>Success for write protection</p><p>STE2P_Open=Ok</p><p>FRT_Init() = OK</p><p>Favorite [0][0] = 0</p><p>Favorite [1][0] = 0</p><p>Favorite [2][0] = 0</p><p>Favorite [3][0] = 0</p><p>Favorite [0][1] = 0</p><p>Favorite [1][1] = 0</p><p>Favorite [2][1] = 0</p><p>Favorite [3][1] = 0</p><p>Favorite [0][0] = 0</p><p>Favorite [0][1] = 0</p><p>Power On Mode = LAST CHANNEL</p><p>mCURSat = 0</p><p>*** BOOT-UP After Noraml Power Off [LOGO/INFO]***</p><p>STAUD_Init(AUD)=Ok</p><p>STDENC_Init(DENC0, InvOut 1)=Ok</p><p>STVTG_Init(VTG0)=Ok</p><p>STVID_Init(VID0)=Ok</p><p>TextFontInit=Ok</p><p>STAUD_Open(AUD)=Ok</p><p>STDENC_Open(DENC0)=Ok</p><p>STVTG_Open(VTG0)=Ok</p><p>STDENC_EnableVideo()=Ok</p><p>Encoder_Init(0)</p><p>STVID_Open(VID0)=Ok</p><p>Eit Init = EIT Slot[1]</p><p>OK</p><p>============Normal Board[v1.2 Sep 23 2002]====================</p><p>Chip STi5518 in board MB275 64MB</p><p>CPU Clock Speed = 81000000</p><p>==============================================</p></blockquote><p></p>
[QUOTE="gsmsikar, post: 43703, member: 177587"] eurostar log with hyper terminal and null modem cable when connected with pc with 9700fta_new software please help me now Sector 7FF60000 Erase, Porgram OK pgm blk=12, bufPtr=40080018 Sector 7FF80000 Erase, Porgram OK pgm blk=13, bufPtr=400a0018 Sector 7FFA0000 Erase, Porgram OK pgm blk=14, bufPtr=400c0018 Sector 7FFC0000 Erase, Porgram OK pgm blk=17, bufPtr=403fbbf8 Sector 7FFF4000 Erase, Porgram OK Restart...........>>>>>>>>>> Viacess DVB Boot Ver 1.00a Mar 20 1999 at 15:26:59 CPU - ST20TP3 Flash 2M, DRAM 4M, MPEG SDRAM 2M, C/I, External Modem. key : 0x3 Jump to Main Initialising Flash ... Flash init .. OnChip flash = 403ffe38 size: 0xc8 Flash init ....... OK!!! Flash init ..EVAL-STB4 Reference Firmware Version 1.2 of Oct 17 2000 at 16:37:16 Update -> Oct 17 2000 Initialising I2C ... => i2c init ok... => pti init ok... Initialising PWM ... Clock Recovery/PWM init: OK Initialising Load Flash ... Init flash home channel check sum : 1f74 current NIT version = 0 Initialising OSD ... ******************************** *** STB FLASH Version : 9040 *** *** S/W FLASH Version : 9040 *** ******************************** FLASH memory channel(psi) data is OK Standard TV RGB Off RF => PAL BG RF Data : ca88 48 25 f4 884825f4Initialising the Digital Video Encoder STV0119 Encoder ->PALBG, RGB ttxt reg[34]=0x00, reg[35]=0x00, reg[38]=0x00, reg[45]=0x00 STV0119 Encoder configured Initialising the STi3520A Initialising 3520 Loop 0 Initialising PLL Done !. 3520A initialised for ES decode only 3520A initialised for full PES decode STi3520 V STi3520 A >>>>>>>>>>>>>>>>>>>>Initialising the 3520A C Version. Setting up the mpeg video interrupt Setting up the mpeg audio interrupt Start mpeg audio packet management process Starting the mpeg iic traffic management process Starting the mpeg audio sync play start process => mpeg init ok... Initialising the gprim library Testing block move engine => gprim init ok... ver=0,sn=0 Initialising Ttxt ... Teletext driver library v1.0 - Version of Oct 17 2000 at 12:17:14 Initialising TABLE ................. 'teletext_handlThe 'teletext_data_transfer' task is running er' task is running PAT PROCESS CREATE OK..... PAT process started PMT PROCESS CREATE OK..... PMT process started table buffer : 0x40058c00 size : 2048 SDT PROCESS CREATE OK..... SDT process started table buffer : 0x40057bf0 size : 4096 NIT PROCESS CREATE OK..... NIT process started table buffer : 0x40056bd0 size : 4096 CAT PROCESS CREATE OK..... CAT process started table buffer : 0x400563c0 size : 2048 B_PMT PROCESS CREATE OK..... Background PMT task start table buffer : 0x400553a0 size : 4096 B_CAT PROCESS CREATE OK..... Background CAT task start table buffer : 0x40054390 size : 4096 => TABLE init ok... table buffer : 0x40053370 size : 4096 Initialising TUNER ................. I2C front init ok. disable back PMT disable back CAT Global Front I2C Reset Tuner Init Start Lsi 64724 sync byte ok! LSI64724 init ok. Tuner Init Process ok LSI Tuner Process Created DisEqC process start ok DiSEqC Process ok Change TR 0 = 1358.0MHz => TUNER init ok... LNB_H/W On LNB on Initialising Front IR ... Initialized KEY SCAN & Display Process! Start 7-seg Display Process! Initialized IR handler! => front_ir init ok... smart card driver memory allocation Success smart card driver memory allocation1 Success card 1 is null!! service_process_params is OK!! smart card driver memory allocation3 Success Service Process is initialized ASC interrupt is initialized ASC interrupt is initialized confirm smart card detect interrupt is initialized smart card driver memory allocation Success smart card driver memory allocation1 Success service_process_params is OK!! smart card driver memory allocation3 Success Service Process is initialized ASC interrupt is initialized ASC interrupt is initialized confirm smart card detect interrupt is initialized Initialising Viaccess ... TABLE VERSION PROCESS CREATE OK table version monitor started !!! Ok to create smart card process smart card detect monitor task started... smart card init monitor task started... smart card i/o monitor task started... pi_program_client_register was called => OK Viaccess version 100.v412 compiled on Aug 11 1999:18:04:31 VIACCESS init OK !!! recover 22k Off hor Fi:1025 Fd:0 Si:28 Sd:0 V:4 Change_Frequency=>TS:1 PTI_PAUSE ^^^ tr:1 sat:2.0 ^^^ Reset LNB offset(0)= -500 KHz Initialising CI ... ================================================================= DVB Common Interface Version : 1.00.03 JULY/25/2000 ================================================================= Current H/W, S/W, Compile mode. CAM VCC/VPP control. CPU ST20TP3. CAM interface : SAMSUNG PALCE22V10H. 1 SLOT. ================================================================= Ci task create ok CI process start!>>>>>>>>>>> Ci timer task create ok Ci Link layer task create ok => CI init ok... Initialising TASK ... ver Ok to create My_ch_change process... My_ch_change process: Started Ok to create My_downloadAll process My_download All process: Started Ok to create TDT process TDT process started Ok to create EIT task ... start DVB EIT download task ... EIT process started table buffer : 0x40050aa0 size : 2048 ForcePowerOff() DVB EIT structure size 228 table buffer : 0x4004fa60 size : 4096 => SLOT[46] was flushed ======== SLOT DEALLOCATION ========= max event is 2047 => SLOT[45] was flushed Waiting EIT packet ... EIT aborted disable EIT EIT stoped ok disable TDT TDT stoped ok PTI_PAUSE(SLOT OFF) => viaccess deactivated OSD> POWER_FAILURE_PROG_FLASH Compare RAM & FLASH -> Same!!! LNB off ver 22KHz Off PAL_NTSC.... process start.... Initialising user i/f => start DBS_usif_task ... usif process created successfully *** Eurostar logo on....USER I/F OK Eurostar CI DVB ver 1.10 Jan 12 1999 at 03:00:42 Ram Clear Check Sum EA26 OK Jan 12 1999 at 03:00:42 Start add=0x7FF3AE58, End add=0x7FFDFFFF Start sector = 9, End sector = 14 Valid Sector. So write Magic pgm blk=17 Sector 7FFF4000 Erase, Porgram OK pgm blk=9 Sector 7FF20000 Erase, Porgram OK pgm blk=10 Sector 7FF40000 Erase, Porgram OK pgm blk=11 Sector 7FF60000 Erase, Porgram OK pgm blk=12 Sector 7FF80000 Erase, Porgram OK pgm blk=13 Sector 7FFA0000 Erase, Porgram OK pgm blk=14 Sector 7FFC0000 Erase, Porgram OK pgm blk=17 Sector 7FFF4000 Erase, Porgram OK Eurostar CI DVB ver 1.10 Jan 12 1999 at 03:00:42 Exist SW Initialising Flash ... AMD FLASH Found!!! FLASH Init OK!!! anon flash32.c 387> Flash init .. Initialising PWM ... EVAL-STB2 Reference Firmware anon pwm.c 140> Clock recovery/PWM init Version 1.2 of Aug 10 2000 at 14:29:57 update -> Aug 10 2000 14:29:57, 20 Initialising Demux ... anon demux.c 1864> demux_init: Demux Aug 10 2000 14:26:48 ST20TP2. anon demux.c 2086> demux_init: Internal memory high = 6736 anon demux.c 2092> demux_init: OK Initialising I2C ... Initialising Load Flash ... Init flash home channel check sum : 4251 current NIT version = 0 Initialising OSD ... ******************************** *** STB FLASH Version : 8060 *** *** S/W FLASH Version : 8060 *** ******************************** FLASH memory channel(psi) data is OK Standard TV RGB Off RF => PAL BG RF Data : ca88 48 25 f4 884825f4 Initialising ST20 Sytem Layer ... anon mpeginit.c 287> Initialising the Digital Video Encoder anon iicvideo.c 135> STV0119 Encoder ->PALBG, RGB ttxt reg[34]=0x00, reg[35]=0x00, reg[38]=0x00, reg[45]=0x00 anon iicvideo.c 194> STV0119 Encoder configured anon mpeginit.c 290> Initialising the STi3520A anon mpeginit.c 1614> Initialising 3520 Loop 0 anon mpeginit.c 143> Initialising PLL Done !. anon mpeginit.c 1116> 3520A initialised for ES decode only anon mpeginit.c 1152> 3520A initialised for full PES decode anon mpeginit.c 295> STi3520 V >>>>>>>>>>>>>>>>>>>>Initialising the 3520A C Version. anon mpeginit.c 297> STi3520 A anon mpeginit.c 370> Setting up the mpeg video interrupt anon mpeginit.c 373> Setting up the mpeg audio interrupt anon mpeginit.c 379> Starting the mpeg video packet management process MpegVideoPacketManager datapipe.c 128> Starting the mpeg audio packet management process anon mpeginit.c 397> Starting the mpeg audio packet management process MpegAudioPacketManager datapipe.c 187> Audio packet consumer process: Started anon mpeginit.c 415> Audio packet consumer process: Started anon mpeginit.c 431> Starting the mpeg audio sync play start process Initialising Gprim ... anon gprim.c 52> Initialising the gprim library anon gprim.c 55> Testing block move engine ver=0,sn=0 TV/RGB off Power LED off Initialising Front IR ... Start 7-seg Display Process! anon front_ir.c 1345> Initialized KEY SCAN & Display Process! anon front_ir.c 1351> Initialized IR handler! LNB_H/W On Initialising SFILTER ... section_init: OK demux_make_circulist ok demux_set_buffer ok Initialising TABLE ... Initialising TUNER ... anon qpsk724.c 1159> Global Front I2C Reset anon qpsk724.c 1180> Tuner Init Start Lsi 64724 sync byte ok! LSI64724 init ok. Tuner Init Process okated LSI Tuner Process Created DiSEqC Process ok DiSEqC Process ok 00[KHz] Change TR 0 = 950000[KHz] Initialising Private ... Initialising Ttxt ... anon ttxt.c 180> Setting up Teletext Interface interrupt anon ttxt.c 189> Starting the Teletext Driver process Initialising USIF ... anon ttxt.c 200> Starting the Teletext Send process *** Eurostar logo on....*** Eurostar logo on....*** Eurostar logo on....TTXT Odd enable !!!! Fs : 90MHz !!!! Ts : 58mSec 2 micro code download start... micro code download complete!! !!!! Fs : 90MHz !!!! Ts : 56mSec 2 Chan data status : BOTH_CHAN QPSK_Change_Channel start =>F:973 S:29 V:4 22k Off 12V Off hor OP_Mode : 0 Orbit_pos : 2 Repeat : 170 High_Low : 0 Polarity : 0 ver Switching On DiSEqC hor Change_Frequency=>TS:0 !!!First!!! channel_index 0, actual_channel 1 actual_prog_index 0, AV_Chan_Flag 1 ^^^ tr:0 sat:2.0 ^^^ Change Freq(1) = 973000 [KHz] Reset LNB offset(0)= -901 KHz actual = 972099 [KHz] !!!! Fs : 90MHz !!!! Ts : 53mSec 2 OP_Mode : 0 Orbit_pos : 2 Repeat : 170 High_Low : 0 Polarity : 0 ver Switching On DiSEqC hor Change Acq(2) = 973000 [KHz] OP_Mode : 0 Orbit_pos : 2 Repeat : 170 High_Low : 0 Polarity : 0 ver Switching On DiSEqC hor Change Acq(2) = 976000 [KHz] OP_Mode : 0 Orbit_pos : 2 Repeat : 170 High_Low : 0 Polarity : 0 ver Switching On DiSEqC hor Change Acq(2) = 970000 [KHz] OP_Mode : 0 Orbit_pos : 2 Repeat : 170 High_Low : 0 Polarity : 0 ver Switching On DiSEqC hor Lock Fail, but Init CI!!!!!! ================================================================ Common Interface Version : 1.00.02 OCT/01/1999 ================================================================ TSI_bypass() CI_defualt_state() Created CI Timer_Process! Start CI Timer Process! TSI_bypass() TSI_bypass() CI_defualt_state() cess! Created CI_link_Process! Initialising TASK ... ver Change Acq(2) = 979000 [KHz] Switching On DiSEqC My_ch_change process: Started My_download All process: Started My_download All process: Started start DVB EIT Parsing start DVB EIT Parsing my_check_active process: Started DVB EIT structure size 228 DVB EIT structure size 228 DVB EIT structure size 228 max event is 2015 ite mode Set TV 4:3 Composite mode CH NO: 1, EWTN prg id 0x11f9 QPSK_Change_Channel start =>F:973 S:29 V:4 22k Off 12V Off hor same Diseqc control in channel change , so just jump by ljch Change_Frequency=>TS:0 ^^^ tr:0 sat:2.0 ^^^ Change Freq(1) = 973000 [KHz] Reset LNB offset(0)= -901 KHz actual = 972099 [KHz] act_prog_idx : 0 check card ok PGM P=03e9 V=03e9 A=04b1 Set Teletext data 44d RF => PAL BG RF Data : ca88 48 25 f4 884825f4Power LED on Created pal_ntsc monitor process. root_process main.c 745> No errors during initialisation Created trap monitor process. Created trap monitor process. STTBX_Init()=Ok STAVMEM_Init()=Ok STAVMEM_CreatePartition()=Ok STEVT_Init()=Ok STI2C_Init()=Ok PTI_Init()=Ok STE2P_Init=Ok STflash_Init=Ok STFlash_Open Ok Ok Success for write protection STE2P_Open=Ok FRT_Init() = OK Favorite [0][0] = 0 Favorite [1][0] = 0 Favorite [2][0] = 0 Favorite [3][0] = 0 Favorite [0][1] = 0 Favorite [1][1] = 0 Favorite [2][1] = 0 Favorite [3][1] = 0 Favorite [0][0] = 0 Favorite [0][1] = 0 Power On Mode = LAST CHANNEL mCURSat = 0 *** BOOT-UP After Noraml Power Off [LOGO/INFO]*** STAUD_Init(AUD)=Ok STDENC_Init(DENC0, InvOut 1)=Ok STVTG_Init(VTG0)=Ok STVID_Init(VID0)=Ok TextFontInit=Ok STAUD_Open(AUD)=Ok STDENC_Open(DENC0)=Ok STVTG_Open(VTG0)=Ok STDENC_EnableVideo()=Ok Encoder_Init(0) STVID_Open(VID0)=Ok Eit Init = EIT Slot[1] OK ============Normal Board[v1.2 Sep 23 2002]==================== Chip STi5518 in board MB275 64MB CPU Clock Speed = 81000000 ============================================== [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Satellite TV receivers & systems support forums
Receiver software, international Section
please help me upgrade one EUROSTAR Eurobox-9700
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top