Predator 359

M

Mickha

Super Moderator
Staff member
My Satellite Setup
1.2M Channel Master, 1224 motor, VU+ Duo 2
My Location
North West
Predator 359 is now available, which includes Premiere on the normal Dragon Cam.
 
Thanks Mickha.

Working fine in my Fortec HD :)

Llew
 
thx for the info where can i find the download for 3.59 as the site i use still has 3.58 on it many thanx
 
If you have a look in the links list you should find a site that has it, but I've uploaded it on sendspace, although you will need to update the keys for D+:
_http://www.sendspace.com/file/3vzmfq
 
thankx mate the site i use has updated so got it now had to update polsat keys aswell as d+ so all working fine now thanks again
 
help needed with dragon cam i av programed with new pred 3.59 but it will seem to unscramble nagra beta but it wont seem to unscramble seca videogaurd powervu via...i am new to this so not sure wat it suppose to unscramble for wat it worth programed loader card with usb laded in cam with machine of booted machine went to cam in receive menu clickt update it updated succesfully took card out rebooted machine chect cam in menu again and it does say pred 3.59...i av manhatton 6800 receiver wi motorised geotrck silent 99 sat system cheers in advance for any help
 
The Dragon will only open, D+ and Premiere packages on 19.2E, you do need to update the latest keys to get D+.
Cabo and D+ on 30W, again both sets of keys need to be updated.
SRG Swiss package on 13E, might need to update the keys, only 6 channels available so not the best package.
To update the keys for D+ and Cabo, go into the Cams menu, Debug, OhlAladin, the provider, D+ or Cabo, and update the correct key 00 or 01, using the Decimal keys, 16 sets of 3 numbers. The first set of 8 numbers go in 00-0 or 01-0, the second set in 00-1 or 01-1.
If you have any problems please read through the Dragon Cam section on the Forum, or start a new thread.
 
The issue with the Sly card inserted when turning on the STB that did not initialize the CAM(I had to remove the card for it to initialize), has been resolved with 3.59. The card in the Pred. smartcard menu(smartcard is NDS), is now reconized.
 
Good after noon on this sunny saturday. I have not posted for a while. I updated my dragon with Predator 359 . All is well. My only concern is now the footy season starts next week. The Humax HDCI 2000 does not have the option to view the extra interactive sports screens. Does that mean I am only stuck to watch the 2 Sports channels which are Premier Sport 1 / Premier Sport 2?

Even to get the 2 sports channels , Humax HDCI 2000 are aware that a Humax Channel editor Formula was required.

So just to repeat my question , I am stuck with the
Premier Sport 1 / Premier Sport 2? I apoligize if this question is a bot off topic.

Shahid
 
This sounds like a problem with your receiver and the Premiere portal, some receivers scan the portal themed channels in as unnamed, other receivers access the channels by pressing a button on the receivers remote control, when on the portal, I think there are 3 portals, sport, film and adult.
Also you might have to enter the individual PID's, for each portal channel, to set them up, before you can access them via the portal.
Check your receivers section, on the forum, for more details regarding your receiver.
For full details of available channels, go to lyngsat, click on the packages link for 19.2E, and click on Premiere, this will give you all the channel information.
 
Hi Shahid,
are the 2 channels listed as unknown part of the Premiere package?
At a rough guess there are about 14 channels accessed through the portals, mainly films and sport.
Try scanning in all the frequencies again:
11720 H 27500
11758 H 27500
11798 H 27500
12032 H 27500
12070 H 27500
12148 H 27500

And if you have a HD receiver, 11914 H 27500
 
Back
Top