Problem With DigitAll World

[Asim]

Hi Friends,
I have DigitAll World SFT 190-M Receiver. few day back i updated it with latest software available that is Ver. 6.78, but after that whenever i switched it on its front panel dispaly shows " booting" and do not go further. can sombody help me. is it software problem? or something bad has happened to its hardware? does somebody has solution for it? i have tried to reload the same ver (i.e; 6.78) again and again but it did not work.....

thanx

 

[aramiz]

I've never heard of your model, but what I'd do if I were in your shoes:
1- try to upload an older version of software (6.77 for instance).
2-If this doesn't work upload the bootloader instead of the software.
go to http://www.digitallworld.com, and download the bootloader of your deco and upload. It should work like a new deco out of factory.

Let us know if any of this helped u

 

[zaheer2006]

not found this model stf 190m in this site WWW.
DigitAll World .COM

 

[tamazgha2003]

you better go here:
http://www.allstb2000.com/

 

[futur_group]

not found this model stf 190m in this site WWW.
DigitAll World .COM

stf 190m i think is the same like qmax without card reader
i send you the boot file try it
it may help you
1-open the loder
2-select file
3-select the file i send you
4-select open
5-pluge in the power cord
wait till see (End) on the front panel
press power botton in the front panel
if it work let me know in case of no let me know too and i will send you the bin flash for your stp
good luck

 

[Analoguesat]

File removed. Do NOT post bin files on this forum I suggest you have a look at our rules before you post further.

 

[futur_group]

File removed. Do NOT post bin files on this forum I suggest you have a look at our rules before you post further.

sorry but i was try to help him
so why all this forum`s if i couldn`t help some one need to help?

 

[mchs_lib]

I have the same receiver and I faced the same problem. But i resolve it just follow my instruction: go to

_http://www.allstb2000.com
and download boot version 1.09 software

then install first this boot version after update your software
& the update the bin file.

100% its working.

Enjoy!!!!!!!!!!!!!!