problems tuning into M6HD on 19.2 via Humax HDCI 2000

[timwebb2]

can anyone help please?

I ordered a Diablo Cam and am now viewing the TNT SD and HD channels via my TNT sat card in a Humax HDCI 2000, as opposed to the Strong SRT 6410 box that was designed for the card. (via 19.2 east)
The only channel I am have been unable tune into is M6 HD, the tuning will not find it.

I go to the tuning menu, input all of relevant search parameters but no joy, the Humax will not lock onto the signal on 12581 V 2200 5/6 DVBS2 and 8PSK. I have tuned in the other HD channels, TF1HD, France2HD and ArteHD.

I downloaded underworld v 1.79 as suggested and this is fine and works.

thanks,
Tim

 

[Llew]

No problem with mine Tim. All channels on that TP scan OK. Sure you have all the correct parameters in the search field? (The SR is 22000 BTW)

Llew

 

[timwebb2]

Llew,

thanks for the information, tried again with 22000 and the other settings for M6HD but still no joy. I live in SE London so I assume the transponder footprint is OK?

regards, Tim

 

[Analoguesat]

Got a dect phone? That frequency is close to one of the problem bands affected by dect phones, BT Homehubs etc.

 

[timwebb2]

could well be ... as I can find the other channels.
I have 3 dect cordless phones around the house and a home hub.
will turn them all off and try tuning in to M6 HD later.

thanks, Tim