Advice Needed Receivers with the lowest Symbol Rate?

[lovelyperson]

Today, 1.8m, totally clear sky, 18.2ºC.
Octagon SF8008 4K Twin.

23.5ºe 12647 V 285 DVB-S QPSK

 

[lovelyperson]

Secured a little bit lower frequency than my previous, so today:-

Alicante, España. 14.45hrs with 16.7ºC Cloudy

1.8m Marrafa PF, Inverto Flange Quad C120.
Octagon SF8008 4K Twin.

8.0°w Eutelsat 8 West B
12622 V 256 1/2

¿Nothing at the mo but has anyone lately secured (shown 02-2023, Flysat) 8.0ºw 12621.46 V 144 2/3?

 

[Adam792]

Secured a little bit lower frequency than my previous, so today:-

Alicante, España. 14.45hrs with 16.7ºC Cloudy

1.8m Marrafa PF, Inverto Flange Quad C120.
Octagon SF8008 4K Twin.

8.0°w Eutelsat 8 West B
12622 V 256 1/2

¿Nothing at the mo but has anyone lately secured (shown 02-2023, Flysat) 8.0ºw 12621.46 V 144 2/3?

View attachment 154320View attachment 154321View attachment 154322

I have once on SDR about a year ago. It contained Tendance Ouest as listed on Flysat.

 

[EnoSat]

In addition to low SR, can someone verify high SR as well?
For example:
8West - 3749L - DVB-S2/8PSK/T2-MI - SR-45830 - FEC-2/3

PS: It's a pity that the T2-MI with SR-60000 was already switched off

 

[lovelyperson]

In addition to low SR, can someone verify high SR as well?
For example:
8West - 3749L - DVB-S2/8PSK/T2-MI - SR-45830 - FEC-2/3

PS: It's a pity that the T2-MI with SR-60000 was already switched off

Not much time at the mo but a little higher:-

25.5°e Es'hail-1
11174 H 47615 FEC Auto - DVB-S2 - Data:-

 

[EnoSat]

not DATA , T2-MI or MIS , since the Si2166 cannot handle it ShortFrameRate (only normal -LongFrameRate)

 

[jsda30]

Uclan Ustym 4K Pro with sr of 250
View attachment 153559

hi stephan94
finally blullseye 10khz lnb arrived here!
it have 2 conectors red and green, which ill must to used?
the tuner configuration its the last you sent in another post isnt it?
ill test with octagon sf8008

 

[EnoSat]

Testing the Othernet "Bullseye BE01" LNB

The Othernet Bullseye BE01 Ku-band Low-Noise Block-downconverter features a tunable 2 ppm TCXO, a 25 MHz reference output, and extended coverage for QO-100 reception. In this article I discuss its specifications, internal construction and performance.

www.pabr.org

 

[jsda30]

Testing the Othernet "Bullseye BE01" LNB

The Othernet Bullseye BE01 Ku-band Low-Noise Block-downconverter features a tunable 2 ppm TCXO, a 25 MHz reference output, and extended coverage for QO-100 reception. In this article I discuss its specifications, internal construction and performance.

www.pabr.org

thanks again enosat! but i dont use with rtl-sdr usb.. direct with my octagon sf8008
you know if i must use a power 12/18v because i have a 16 century disec

 

[EnoSat]

It doesn't really matter if you use the 12/18 or 13/17 power supply from the SF8008, the main thing is to connect the cable to the correct connector

 

[jsda30]

I am also happy with my old SF4008. As mentioned by tompouce last drivers supports SR around 500, with old drivers not a problem even with SR 256 (scan + listen). "Old drivers" also see SR 186 for example on 30W but I can't scan it. See pictures attachment. SF8008 is still the best STB for low SR.

hi master.. great...
i can see that you can get sr 185 hispasat.... you get with old octagon sf4008? manufactured year? image?

 

[Channel Hopper]

hi stephan94
finally blullseye 10khz lnb arrived here!
it have 2 conectors red and green, which ill must to used?
the tuner configuration its the last you sent in another post isnt it?
ill test with octagon sf8008

I found the LNB good, but the Fracarro twin LNB (UX-TW frm memory) just edged into the lead in terms of fringe reception.

 

[Satfaca]

I agree.

 

[jsda30]

hi everybody....
yesterday i installed de bullseye 10khz lnb but not get signal at 26e
i have octagon sf8008 with openatv
need a special image?
special configurarion on box?
thanks for the help!!

 

[jsda30]

Uclan Ustym 4K Pro with sr of 250
View attachment 153559

hi stepham yesterday i installed bullseye 10 khz lnb with my octagon sf8008 and not signal
need tnap image?
which image you used in that screenshot? skin?
im using openatv
can u sent complete turner configuration?
thqnks in advanced!!

 

[suedschwede]

@ jsda30​

An unconverted LNB (LO 9750 MHz) cannot be used!

 

[jsda30]

@ jsda30​

thanks a lot
im using bullseye 10khz lnb... i think thats for that channels...
in the manual are talking about octagon sf8008 mine its combo.. but same turner...
also turner configuration are single lnb i have diseqc....
ill test again....
thanks

 

[Channel Hopper]

hi everybody....
yesterday i installed de bullseye 10khz lnb but not get signal at 26e
i have octagon sf8008 with openatv
need a special image?
special configurarion on box?
thanks for the help!!

I have twelve transponders from the satellite on the 1m dish here.
Has somebody put washing out ?

 

[jsda30]

@ jsda30​

hi... thanks again for the info and pdf instructions...
on that pdf file said that on tuner configuration i must to insert the lnb input.... on that pdf said 9388
i have bulleye lnb special for 25e satellite.. where can i see the input for insert on my box?
thanks

 

[stephan94]

even lower with the openbox S3CI II,
this time NRW radio on 23.5 Ost with sr 285