recommendation for a programmer

B

bennykoo2003

Member
My Location
israel
Can somebody please recommend me a relaiable programmer
for FUNCARD 4/5 to begin with since i have choosen "entering"
this area with the JOKER Cam.
 
ELVIs programmer of course, to prog.Funcard,Gold card,Silver

card,Basic card,Titanium card,Blue card,Green card,..etc
 
For straight programming of cards it has to be a Digitech or Infinity usb every time.

They perform better than any serial, or parallel programmer,just insert your card, and they will tell what you configuration your card is.

Select your files and just press write,and watch it go,like the road runner, that fast to programm.

The Digitech is the cheaper of the two,same software.

Cheers m8

O-grab O-grab O-grab
 
I am not sure,but I don´t think USB prog,will program the

M2,Basic,Titanium cards.(very useful cards today).
 
The new USB-Phoenix has a very large repertoire.

Infinity USB Phoenix programs most popular smartcards on the market:

PIC-based:

Wafercard (16C84, 16F84, 16F84A)
Goldcard (16F84/16F84A + 24C16)
Silvercard (16F876/16F877 + 24C64)
Greencard (16F876/16F877 + 24C128)
Greencard2 (16F876/16F877 + 24C256)
Bluecard (16F84A + 24C64)
CanaryCard (16F628 + 24C16)
EmeraldCard (16F628 + 24C64)
Singlepic (16F876, 16F627, 16F628).

AVR-based:

Funcard/Funcard2 (AT90S8515 + 24C64)
PrussianCard/Funcard3 (AT90S8515 + 24C128)
PrussianCard2/Funcard4 (AT90S8515 + 24C256)
PrussianCard3/Funcard5 (AT90S8515 + 24C512)
PrussianCard4/Funcard6 (AT90S8515 + 24C1024)
JupiterCard (AT90S2343 + 24C16)
JupiterCard2 (AT90S8535 + 24C64)
FunCard ATmega161 (ATmega161 + 24C64)
FunCard ATmega163 (ATmega163 + 24C256)
BlackCard (ATmega128 + 24C256)

Cards accessed thru built-in Phoenix interface (by use of 3rd party software):

GSM/SIM-cards

Megapic
M-II
Titaniumcard
Basiccard 4.5D

All other cards accessible by Phoenix or Smartmouse / 3.58, 3.68 or 6.00MHz
 
Back
Top