RF2 outlet on latest HD boxes problem

P

pajo100

Regular Member
My Satellite Setup
1.2 /1.8 Channel Master fully 36v motorised 58west to 42east Pace MSS500 Positioner
,Technomate 6900 Super HD ,Humax 8100PVR oh and a Amstrad Sky+ digibox.
My Location
Ireland
I just got a new HD+ Sky box and the RF 2 outlet is tuned to the correct channel on my bedroom set but its not coming through the TV link to the set the red light is on on the link.

Any ideas guyz as it was working fine with the old box ,even rescanned all the RF channels but nothing.
 
I suppose the first thing I would check is that I've plugged into the right RF output by swapping it around with RF1.
 
Doesn't RF2 have to be activated from the menu?
 
Yes the power does, but the signal will come through without the power switched on. Switching the power on is the same as on the older boxes, go to Services, then click on the spanner in the top menu, the cursor will highlight Picture. Type in 0,1,select and got to RF out and turn the power on. :)

The default setting for the digibox RF modulator is normally channel 68.
 
Checked all those and power was on then rechecked second tv and power light was on the link (a lot of head scratching) removed the cover over the RF in socket on the second tv and the friggin plug had slipped out !!! all ok now.
 
Back
Top