Satlink ws-6933

[James Powell]

Hi! I am trying to set up a new Satlink ws6933 to help me set up a Fransat system. The satellite I am interested in is Eutelsat 5W. I have entered LNB as universal, but wanted to cgeck the data in the other fields, e.g. low freq 09750, high freq 10600, TP num 01, frequency 03630, Symbrate 03255. Do these sound right?

 

[satkijker]

Welcome @James Powell.
I think you have C-Eutelsat 5W chosen. This is easiest i think.
Dish NOT connect yet.
Turn the WS-6933 on - go to Signal Scan and press OK - press the button to richt - select satellite C-Eutelsat 5W with button up/down and press OK.
Now press down key to F:..... press OK, now this frequency can be changed in 10972 with the up/down and the to richt button, then press OK.
Now press down key to SR:...... press OK - now SR: can be changed in 29950 with the up/down and the richt button - then press OK.
Now press button down key to POL: and with the left/right button on V.
Now press RETURN key than press the left button to YES and than press OK.

Now connect the dish. Puth the WS-6933 on - now go to Signal Scan press OK - now you have satellite C-Eutelsat 5W - than press down to F: 10972 now you can align the dish.
Success.
Instruction manual

 

[Erdal]

I have the same issue. I could not open pdf file. Can you re load it. Thank you

 

[Topper]

No need to upload again PDF file works perfectly for me, I have just downloaded and opened

 

[Carib]

I'm in the US Virgin Islands and bought one of these. I'm trying to setup Dishnetwork east arc 119 and 110 on the unit but I'm at a total lost. Any pointers in the right direction will be greatly appreciated.