bluenosebryan
Member
- My Satellite Setup
- dreambox 500s
- My Location
- lancashire
Hi i know there are numerous topics on the subject but nothing makes sense i am putting in the correct lattitude settings on the motor 53.7992 so basically im setting the lattitude to just under 54 on the markings at the side of the motor,so i think i have done that correctly
Now onto the dish elevation,i had my dish pointing at 28.2 and used the setting from dishpointer.com of 22.3 degrees but the signal was quite low so i bought a sat finder to get the strongest possible signal,so now the dish elevation is at around 28 degrees for the strongest signal but now signal is weaker on other satallites,someone please help as im ready to pull my hair our,if anyone can give me step by step instructions i would be very gratefull like at where to point the dish in the first place and which elevation setting to set dish at
Also my bracket the dish sits on is perfectly flush so that counts that out and im in blackpool uk
Now onto the dish elevation,i had my dish pointing at 28.2 and used the setting from dishpointer.com of 22.3 degrees but the signal was quite low so i bought a sat finder to get the strongest possible signal,so now the dish elevation is at around 28 degrees for the strongest signal but now signal is weaker on other satallites,someone please help as im ready to pull my hair our,if anyone can give me step by step instructions i would be very gratefull like at where to point the dish in the first place and which elevation setting to set dish at
Also my bracket the dish sits on is perfectly flush so that counts that out and im in blackpool uk