Setting up a Passion HD for idiots guide needed

[adam watson]

Hi Gang,

I have a Fortec Star Passion HD receiver plugged into a 4 port dieqsc. Port 1 goes to a multiswitch for 28.2, port 2 straight to a LNB for 19.2 and port 3 to a LNB for 23.5.

I seem to be having trouble getting channels off anything but 28.2. What are the Dieqsc settings I need to use? There is Dieqsc A, B, C or D and a port number. I know port 1 for 28.2 but what is A, B, C, D for?

The transponder list for 23.5 and 19.2 seems wrong in the menu, have I got to go through every one and correct it against the lists on KingOfSat or can I get it to scan for the available ones?

Many Thanks

Adam

 

[Analoguesat]

B will be port 2
C will be port 3
D will be port 4

 

[Llew]

Hi Gang,

I have a Fortec Star Passion HD receiver plugged into a 4 port dieqsc. Port 1 goes to a multiswitch for 28.2, port 2 straight to a LNB for 19.2 and port 3 to a LNB for 23.5.

I seem to be having trouble getting channels off anything but 28.2. What are the Dieqsc settings I need to use? There is Dieqsc A, B, C or D and a port number. I know port 1 for 28.2 but what is A, B, C, D for?

The transponder list for 23.5 and 19.2 seems wrong in the menu, have I got to go through every one and correct it against the lists on KingOfSat or can I get it to scan for the available ones?

Many Thanks

Adam

You can delete all channels in your list for, say, 23.5E (Port C for you) and scan for a new list by going to Main Menu, then select the second icon in the top boxes.

Input Password 0000 (if you haven't changed your password) and select Delete All Channels By Satellite. Choose Astra 23.5E.

Back to Antenna Setup, choose Astra 23.5E and press Yellow button for a new TP scan of that satellite.