N
net1
Guest
To correct certain faults on new Sky + boxes such as;
# Stuck in standby
# unable to record
# loss of IF on input 2
it is possible a ' factory reset' process may cure the problem.
1. Switch off at the mains
2. Holdin Left and Right navigation buttons, switch power on and hold for about 30 seconds until Green play light comes on
3. Press 'Select'
4. The 'play-light' will then rotate clockwise while the resetting procedure takes place. This may take up to 3 minutes. (this timing could vary if there are no programmes stored in the hard drive)
5. It then reverts to 'Standby'
6. Leave the machine for 2 minutes while hard drive reformats.
Please Note:
THE MACHINE WILL LOSE ALL STORED PROGRAMMES IF THIS PROCESS IS FOLLOWED.
# Stuck in standby
# unable to record
# loss of IF on input 2
it is possible a ' factory reset' process may cure the problem.
1. Switch off at the mains
2. Holdin Left and Right navigation buttons, switch power on and hold for about 30 seconds until Green play light comes on
3. Press 'Select'
4. The 'play-light' will then rotate clockwise while the resetting procedure takes place. This may take up to 3 minutes. (this timing could vary if there are no programmes stored in the hard drive)
5. It then reverts to 'Standby'
6. Leave the machine for 2 minutes while hard drive reformats.
Please Note:
THE MACHINE WILL LOSE ALL STORED PROGRAMMES IF THIS PROCESS IS FOLLOWED.