Sly UK NewCS / CCcam Config Creator

Status
Not open for further replies.
Well got my TM9100 up and running. The Newcs config generator works a treat, Used the beta2 version as the latest wouldn't run on my PC. This was way faster than generating the file manually. Tried the CCcam generator and i got the basics together with it, but then polished it off myself. Overall though a VERY NICE JOB you have done on this util :)
 
what a great tool this is

as well as cccam support, would it be possible to add the creation of newcam.list file for mgcamd

also, would you mind if i copied this over to another forum, as this will help many people out

ive just gone to install it, and also get

Runtime Error 339

Component 'TABCTL32.OCX' or one of its dependancies not correctly registered: a file is missing or invalid

but after downloading the file from here into my windows/system32 folder its now working fine :)
 
Thanks for the link. Its ok with me if you want to use it elsewhere.
 
Ok chaps here's beta4 of the CCCCC.

Changelog:-

More GUI changes.
Addition of Simple and Advanced mode.

Other minor changes.
 
B16MCC said:
Ok chaps here's beta4 of the CCCCC.

Changelog:-

More GUI changes.
Addition of Simple and Advanced mode.

Other minor changes.
Click to expand...

WOW Keep up the good work
 
This looks the buisiness, but unfortantly i cant try it as im on Vista and getting all the error mesages, any news on a vista release mate.

Well done anyway cant wait to use, might even pull my old xp out of the cuboard
 
B16MCC said:
Ok chaps here's beta4 of the CCCCC.

Changelog:-

More GUI changes.
Addition of Simple and Advanced mode.

Other minor changes.
Click to expand...

It's now working on my Vista laptop (32bit) without any changes or files added. :-worship
 
@B16MCC
I have found an error when you go to add a user, the fault is the same with all except the default user.

<user>
<name>sonic1</user>
 <pass>sonic1</pass>
<au>Yes</au>
<sidoverride>No</sidoverride>
<spider>Yes</spider>
</user>

Thanks for the great work ;)
 
Tell me what am i doing wrong then, wont work on my Vista.

I cant wait to try this app.
 
themangeary said:
Tell me what am i doing wrong then, wont work on my Vista.

I cant wait to try this app.
Click to expand...

What error are you getting? Did you follow the thread mentioned by "dui"? http://www.satellites.co.uk/satellit...49-post22.html
I simply loaded the beta4 and ran it without problems. Running Vista32 on a corporate laptop with SP1 and lots of security stuff. Coincidentally, SP2 rollout here is not happening to to some incompatibilty with applications? r u running sp2?

I will try it on a SP2 Vista64 tonight and report back
 
Thanks Wildbit, And a special thanks B16mcc ths is a great idea now i got it working (not your fault its Vistas).

This will keep me busy for a while.

Keep up the good work
 
Hi guys. Here's beta 4.1 of the CCCCC.

Change Log:-

1. Fixed a bug in the newcs.xml code when adding extra users.

Thanks to Sonic1 for finding it and reporting back.

NOTE:- Development has now started in Visual Studio 2008. This will mean further releases will be .NET Framework 3.5 compliant and will be fully packaged and Vista compatible. Please bare with me on this, its almost a full re-write.U-zzz
 
Hello B16MCC,

Some time ago you may recall me posting about problems with generating the BoxID for a White Sly card that was paired to an old STB with a strange serial number. After some tinkering, I did get this working.

However, for some unknown reason, 2 months later and I can no longer view any scrambled channels. Absolutely nothing has been changed and no tinkering. Have you any ideas what could have happened?

Perhaps the card has lost its heartbeat or have Sly upped the anti? I was using the CCcam 2.1.1 + NewCS 1.66 method with the BoxID entered.

Thanks in advance!

Cheers,

Paul.
 
Can't find any bugs but the default CCcam.cfg needs an update to include sid assign ;)
 
Ok mate yes, you need to look at your blocker settings, if you have all blockers set to YES then your card will definitely NOT update the entitlements. Its likely this is your problem. Bung the card back in the sly box and leave it on sly one until it comes on. When it comes on put it back in the Dreambox.

If you have blockers all on, then change the first 2 to NO and see what happens next time. I'm still waiting for mine to see if it works.

Could you expand on how you got the boxkey working please ?
 
This will not work for me,
I've tried many differing things but still no go.

I had my card and $ky HD box installed yesterday,
I used to use the old bluecard and CCcam but I've now upgraded.

Still getting black screens with the white card.

Also a couple of questions.
My Box iD is 10 chars long and not 11 like application states however the app (at least the previous version) created the correct hex code.

There is no Serial on the bottom of the box mine is at the rear and it has two SN's
one the Box SN and the other is the NDS SN.
BOX SN is 15 Chars long
NDS SN is 17 Chars long and is made up in part by the BOXID in the Menu.

All needed ports are open and forwarding correctly, any ideas?

Also tiny bug reports.
If you press cancel the application still creates the file?
 
Hi Guys

Thanx for the program.
Does anybody have a copy of the cccam.cfg and newcs.xml files that run on a dreambox 600? I have tried everything but it just isn't working with my white sly card. Am I installing the files in the correct location?
CCcam.cfg = /var/etc
newcs.xml = /var/tuxbox/config

thanx
simdex
 
zoro25:- Enter the 17 digit number into the app , it will create the boxkey from there.

zoro25 & simdex :- Before you move to CCcam make sure you're happy with NewCS. Use the web interface to check whats going on with your card, in the readers page make sure its listed and showing the correct CAID, if the CAID shows at 0900 its likely you have the boxkey wrong.

If you see 0963 then check the entitlements , if they are listed and current then you can move onto CCcam config.
 
thanx B16MCC it all looks ok in newcd. This is what I have in my cccam.cfg


N: 127.0.0.1 10001 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 10000 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14

If I goto cccam info and look at servers I see

127.0.0.1:10001 - 0 cards
127.0.0.1:10002 - 0 cards
 
Status
Not open for further replies.
Back
Top