SpaceX Eutelsat 36D

[Marcus_21]

The transponders of the Sub-Sahara Africa beam have migrated to 36D: EA1,EA2,EA3,EA4,EA5,EA6,EA7,EA8,EA10,EA12,EA14,EA16,EA18 and EA28.

While the transponders EA9,EA11,EA13,EA15,EA17 and EA19, which on lyngsat and flysat were reported on 36B, but were actually on the Express AMU1... were not affected by migration.

Before


After

 

[hatters1976]

I checked this morning still dead signal here south east of Greece with a wave frontier T90 dish.
I wait for the rest of the beams i suppose.

 

[solly]

I checked this morning still dead signal here south east of Greece with a wave frontier T90 dish.
I wait for the rest of the beams i suppose.

maybe bigger dish more then 3m need it ?

 

[Satfaca]

Not a trace from the Sub-Sahara beam anymore with 2.4m , this "lucky" transponder has also gone for me...

 

[Satfaca]

On the other hand there is now far less interference with the Tricolor/russian beam so reception of this should now be easier.

 

[solly]

it possible check signal on spectrum to view night and day if it stable signal ?

 

[anto@]

for me this tp is receivable, now I did a scan and it found almost 900 channels

 

[solly]

for me this tp is receivable, now I did a scan and it found almost 900 channels

8.5db mer very weel
what size dish are got signal and location ?

 

[anto@]

lamine 180
Lodi
Italia

 

[anto@]

Sorry 600 ch

 

[Marcus_21]

I think that during the night, many transponders of the russia beam were transferred to the new 36D. If you look at the images, the part of the spectrum that I marked has undergone a change... for those who receive the russia beam can check if you notice changes on the range 11700-12200? Thanks.

Before: 00:01 Italian time (UTC +2)


After: 01:38 Italian time (UTC +2)

 

[hatters1976]

Good morning it is strange that Eutelsat has not announced a starting date for this satellite!
I suppose that 1st of october it might be this date. I just saw a confirmation that Eutelsat 36D
started before 2-3 hours with the transfer of all transponders of DTSV.

 

[solly]

I think that during the night, many transponders of the russia beam were transferred to the new 36D. If you look at the images, the part of the spectrum that I marked has undergone a change... for those who receive the russia beam can check if you notice changes on the range 11700-12200? Thanks.

Before: 00:01 Italian time (UTC +2)
View attachment 157862

After: 01:38 Italian time (UTC +2)
View attachment 157863

it move also express amu 1 or eutelsat 36b ?

 

[satesco]

I think that during the night, many transponders of the russia beam were transferred to the new 36D. If you look at the images, the part of the spectrum that I marked has undergone a change... for those who receive the russia beam can check if you notice changes on the range 11700-12200? Thanks.

...

The signal on the new Eut 3D remained the same in my area (no new transponder) with Circular lnb.

Here is the signal with linear lnb, a slight increase in my area.
(Compare to what I posted at #55 and #60).

What LNB did you use at this position on all bands?

 

[Maxx@]

My location's signal increased by 2.5 dB (Russian beam) . Now the signal with circular polarization is 15-16 dB.
I have an Inwerto Ultra converter converted to circular polarization.
I also catch linear polarization using this converter and here the signal from the 11221 H (Eurasian beam) transponder is also improved by about 1.8 dB. I currently have 10 dB on this transponder .The 11345 H (Eurasian beam) transponder remained unchanged and I still have 9.3 dB because it still transmits from the old satellite.

 

[anto@]

My location's signal increased by 2.5 dB (Russian beam) . Now the signal with circular polarization is 15-16 dB.
I have an Inwerto Ultra converter converted to circular polarization.
I also catch linear polarization using this converter and here the signal from the 11221 H (Eurasian beam) transponder is also improved by about 1.8 dB. I currently have 10 dB on this transponder .The 11345 H (Eurasian beam) transponder remained unchanged and I still have 9.3 dB because it still transmits from the old satellite.

where do you get it from?
this is my scan today, cloudy sky

 

[Maxx@]

In Poland, the signals have changed for the better.
They even write about it on some Polish forums.
Of course, I mean the new Eutelsat 36D
It's cloudy here today too .

 

[cybertomanek]

My Signal ATM

 

[Marcus_21]

The signal on the new Eut 3D remained the same in my area (no new transponder) with Circular lnb.

Here is the signal with linear lnb, a slight increase in my area.
(Compare to what I posted at #55 and #60).

What LNB did you use at this position on all bands?

lnb is a inverto home pro quad, for linear polarity.

In my area, the Sub-Sahara Africa beam was arriving, even if very weak. Beam Russian never arrived.
You can see in the spectrum I posted, a timid signal from the Russian beam that spills over to both polarities of the LNB for linear polarity.

 

[satesco]

Now, after the transponders were completely transferred to Eutelsat 36D, I noticed a significant increase in signal from 2dB to 5 dB.
From this time, it is possible to pick up the signal and lock the transponders with a smaller antenna, which was previously only possible with a 1.50m antenna.
I checked at this time with 1.10m antennas and lnb IBU.