SS2 Progdvb and eutelsat w3 7e

N

nabeelayaz

Member
My Satellite Setup
Pentium D 3 GHz, 1 GB Ram, 160+160 GB RAID-0
Skystar2 PCI
My Location
Karachi, Pakistan
Hi All.

I've installed Progdvb with s2emu1.091 alongwith a softcam key .. s2emu is active but all i can see are the FTA's .. no red channels can be opened .. I've noticed that most of the channels are not found in the softcam.key that i got.. is it because of this reason. if so where can i find the softcam.key that works with Eutelsat w3 channels. most channels are on cryptoworks or via access.

Thanks in advance
 
You need a later softcam, S2emu 1.26 is the current version. Also make sure your keyfile is up to date.

Rgds



L.:)
 
Hi and thanks for a quick reply mate. Any locations from where i can find the latest softcam key files
 
Thanks Lance, i've got one locked chanel working (TV5 orient Globecast) all remaining still are locked . all the soft keys i downloaded have information for 13E or 4E ,5E but none contains anything for 7E.. is it due to this reason or am i still missing something , S2emu is showing Nagra1 and 2 checked.. any ideas...???
 
Well not much success yet.. s2emu is active and in info it's showing that seca2.cfg is missing , it's also showing some hex code and on some channels it's showing viaaccess encryption and no ident in softcam.. what should i do
 
Forget the seca2 file, it's not been used since skyitalia went to videoguard.
The no ident means that the channel is in Via 2.5 or above so is secure.
There really isn't much open at the moment on 13E. Get Vplug 9.1 and put it in the progdvb dir, it will AU on TPS if you leave your internet connection on.


Rgds


L.:)
 
got vplug 1.92..will install it and check it ... i didnt get the AU , tps and internet connection part.. by the way i'm using opensky satsurf package
 
Yes - 9.2 has been reported as not updating correctly. Try to find 9.1.


L.:)
 
Hey Lance,
I think u got me wrong. i meant that i havent checked it yet but when you mentioned something about AU and tps and leaving my internet connection on, i didnt get that part , i hope you understand now.

thanks
 
Ok - Vplug will attempt to connect to the internet when the AES changes and get the newest key (takes about 4 seconds) then write it to the softcam file,
This is why you need to be connected to the net all the time. There were reports that .9.2 wasn't doing this as well as the previous version.


L.:)
 
Lancelot said:
9.2 has been reported as not updating correctly. Try to find 9.1.


L.:)
Click to expand...

:)cheers m8, that explains why....... :(
 
yea 92 is doing nothing ..cant find 9.1 ..but i did found 9.0 which is still no use .. is says Unknown.. incorect hash... autoecm started..
 
OK..so I finally got V-plug 0.9.1 .it's running but still no channels..Heres what the monitor shows
Name=REALITY
tp_id=50200
CA_Typ[0]=3328 (Hex=0D00)=Philips (Cryptoworks)
ECM[0]=1170 (Hex=0492)
EMM[0]=1170 (Hex=0492)
ProviderID[0]=0 (Hex=000000)
Video_pid=2104
Audio_pid=2217
TeleText_pid=0
PMT_pid=105
PCR_pid=2104
ECM_PID=1170
SID_pid=1505
AC3_pid=0

Cryptoworks - CAID: 0D00
ecm-len = 183
ProviderID = C0
Your softcam.key file has not this key: W 0D00C0 06 XXXX;
and then i update it from internet ..

Getting AES key from: http://aes.lapin-blanc.com/aes/


File Changed: Softcam.key 6/27/2006 9:43:52 PM
after that i've tried re-reading keys .exiting and relaunching but still no video
 
Then your sofcam.key is not current. Digiturk are changing once a day.
 
hmm ok..so is there any solution to that. or am i stuck with just the FTA's
 
I've done some searching again to find out if i can find this key somewhere
"W 0D00C0 06" but havent found it yet anywhere, have downloaded latest softcams from everywhere but v-plug is still telling me that you do not have this key in your softcam , it's a cardcam key, so guys anyone know any resources where i can specifically find krys for crypto on eutelsat 7E
 
The Digiturk keys are not known after the 16th of this month I think.


L.:)
 
Back
Top