T&K brackets

thecaretaker

Regular Member
Joined
Jun 15, 2008
Messages
265
Reaction score
30
Points
28
Age
66
Location
Lat: 50.86021 Long: 0.52973
Website
www.thecaretakers.net
My Satellite Setup
VU+ Ultimo, Duo2
85cm Fracarro Penta dish
Inverto BLACK Ultra QUAD
My Location
South East Coast, England
I purchased a set of T&K brackets from a local Tandy store about 25 years ago to erect my UHF TV Ariel. It is still going strong, no signs of rust and I'm confident it will last many more years.

However, a year ago, I purchased online a set of T&K brackets (looked just the same) for my motorised dish and it is red with rust after a year.

It is hard to tell by looking at online sites what the quality of the brackets 'really' is like. There is obviously galvanising and then there is galvanising!

I've come to the conclusion that online sites will often opt for the lighter versions to keep the cost of postage down. A really thick, well galvanised T&K brackets is a heavy item to put through the post.

I can no longer find anywhere locally that sell them. Can somebody recommend a source where I can purchase 'well made' heavy duty T&K brackets that will last more than a couple of years? (20+ would be good).

I live on the south coast with sea breezes, salty air and need top quality. Mine hasn't dropped off the wall yet, but I don't think it will be long (maybe one more winter).

Any ideas? I'm happy to travel to get them, but must be the biz! Alternatively, do you know anybody who makes them to order?
 

edinstu

Member
Joined
Jul 9, 2009
Messages
2
Reaction score
0
Points
0
Age
45
My Satellite Setup
sky hd, quad lnb and zone 2 dish
My Location
scotland
I would imagine that a local blacksmith would be able to sort that out for you, you could find your local AVC COUNTER, or if you can find a sky engineer you could offer him cash!
 

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,078
Reaction score
8,664
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
I got my T&Ks from Creative Satellite.

Had them three years or so and no sign of any degradation at all.

Linkie _http://www.creativesatellite.co.uk

Unfortunately a direct link to the "brackets" page doesn't seem to want to play, but it's easy enough to find.
 

thecaretaker

Regular Member
Joined
Jun 15, 2008
Messages
265
Reaction score
30
Points
28
Age
66
Location
Lat: 50.86021 Long: 0.52973
Website
www.thecaretakers.net
My Satellite Setup
VU+ Ultimo, Duo2
85cm Fracarro Penta dish
Inverto BLACK Ultra QUAD
My Location
South East Coast, England
Cheers Tivu. I eventually found the brackets. It doesn't actually say they are galvanised though, just that they are made from 40x40x30mm steel.

I did find one site that offers galvanised and non-galvanised brackets, so unless it actually says galvanised, I'm not sure. Thanks for tryin'

Maybe I'll look at edinstu's idea. A building firm might be able to point me in the right direction to get them made up (to my spec 40x40x60mm hehehehe only joking). cheers!
 

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,078
Reaction score
8,664
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
thecaretaker said:
Cheers Tivu. I eventually found the brackets. It doesn't actually say they are galvanised though, just that they are made from 40x40x30mm steel.

I did find one site that offers galvanised and non-galvanised brackets, so unless it actually says galvanised, I'm not sure. Thanks for tryin'

Maybe I'll look at edinstu's idea. A building firm might be able to point me in the right direction to get them made up (to my spec 40x40x60mm hehehehe only joking). cheers!

Mine are definitely galvanised, but I don't know if he supplies something different now. But do give him a ring - I found him very knowledgeable and helpful.
 

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,292
Reaction score
1,615
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
I mostly use Blake T&Ks and whilst the steel has got thinner over the last couple of years, they do seem to be well made and properly galvanised.

In fact I've noticed that most bracketry on the market is thinner than it was a year or so ago and the quality of itms like U bolts has deteriorated.
 

Robbo

Retired Mod
Joined
May 17, 2007
Messages
6,424
Reaction score
5
Points
38
Age
57
Website
www.mbcsatellites.co.uk
My Satellite Setup
TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
My Location
Gravesend,Kent,UK
I've had a few sets from TLC direct, they are galvanised but only do the 12" or 24". There doesn't seem to be any difference between those and the ones I normally get from a trade outlet. Your closest branch probably by the Medway tunnel.
 

wod

Regular Member
Joined
Aug 7, 2005
Messages
4,213
Reaction score
238
Points
63
My Satellite Setup
1m channel master, jaeger smr1224, Inverto black ultra twin, technomate tm-1500ci, broken receiver vantage x221ci, New additions Skybox F5s and technomate tm-5402 HD arriving soon.
My Location
yorkshire
i got mine from j&p aerial supplies or something like that on ebay and they are 5mm thick and galvanised very strong holding up my system.
 
Top