TAQ***LA Freezes

[firebase1]

I have a Matrix Rev with mrv2.19 loaded on a Humax CI-8100 and TAQ***LA (all chans) will freeze up for a few seconds every few minutes. Any help on how I might correct this? All other channels work fine.
Thanks

FB1

 

[ENANOS]

I have the same problem only it does not freezes but it goes black for 30 sec every 3 or 5 minutes. I have MRV 2.19


Thanks

 

[daveenty]

Nothing happening with this on MR at the moment. It is a known problem, and hopefully will be fixed in next revision. (Only repeating what I've read by the way, not clever enough to have a go myself!)

 

[McDude]

Also getting freezing on mrv 219 and humax 5300. When tried in 5400 it was slightly better

 

[ondaviva]

Hi!
I have a problem with my Matrix Revoltions + Firmware 2.19 or 2.19c .
I have freezes in Digital+ (taquillas). Why???

Solutions?????

Sory my English, i´m portuguese and y speak French to...
Thankss everobody.....

 

[rolfw]

A known problem as mentioned above ondaviva, hopefully will be fixed with the next software version.

 

[jaimea]

If you have a programmer and titanium card, check out the threads here and on other forums WRT D+ working on tit card.

 

[ondaviva]

Ok Rolf
When the next software or firmware?'??
THANKS.....

Rolf​

Rolf​

 

[ucef]

Ok Rolf
When the next software or firmware?'??
THANKS.....

Rolf​

Rolf​

the only solution now is the tit card
But how to do it

 

[guiri]

the only solution now is the tit card

not quite, my matrix reloaded at 1.071 is working nicely with a season interface and wce software for d+

 

[saturnorbit]

me has 3 matrix revolutions, One of them works fine, the other two are blotchy.
The blotchy ones, seem to be hardware 1.5 and loader 1.0

 

[cableman]

I have a Matrix Rev with mrv2.19 loaded on a Humax CI-8100 and TAQ***LA (all chans) will freeze up for a few seconds every few minutes. Any help on how I might correct this? All other channels work fine.
Thanks

FB1

Don't know if it could be useful but had the same problem of freezes with my Dragon on D+ and Taq*. In the end the problem was a conflict between the embedded cas of my Technomate 5500cisuper and Dragon. I simply deleted the provider codes from the receiver's cas system and instantly no more freezes. Could it be a similar problem with MRV?

 

[martinw01908]

Also freezes on my Fortec, but viewed it great on the Dreambox with newcamd

 

[firebase1]

New rev is out and seems to fix the prob. Only tested a few mins but no lock-ups yet.

Thanks!!!

 

[apkay]

220 is out now and working oke no frees on taq.

New rev is out and seems to fix the prob. Only tested a few mins but no lock-ups yet.

Thanks!!!

 

[ucef]

enjoy the files m8s ;)

Sorry m8. We don't allow files here. Please read the rules.

STICK