Technomate 1500 download problems

B

burnet01

Regular Member
My Satellite Setup
TEchnomate 1500 CI+ Super
80cm Dish
Fortec Start Universal Single 0.3 NF
My Location
Scotland
I got some problems trying to download software from the PC to the receiver.
I fallowed the instructions as the manual says; for start the manual says “download the latest software (.STB) of your receiver”. I went to www.technomate.com but there is not any .STB software there.

I downloaded the TM Loader and the Channel listing for TM-1000D-CI-1600-1500ci+. But it was not possible to download to the receiver. I got these errors: “Invalid firmware file” and “Invalid NDF file”

Does any one know what the problem is?
 
Try a different loader and firmware
Go to alsat.co.uk

A security box pops up
Type alsat then alsat again
Create a free account and look for the Technomate section
There you will find loaders and software for your Technomate 1500

I've used the loader and softwrae there lots of times and it always works fine for me.
 
Thanks, I'll try that.
How is it possible from the official Technomate site doens't work?
 
hi! I'm new to this satellite world. Just cancelled sky and swapped for the Technomate 1500... At first i can watch scrambled channels from hotbird and so on but not any more. I have just bought a 1.2m dish with motorised setup to replace the old sky dish but the problem now is that i cant watch no scrambled channel anymore. some one told me to repatch using darkman and all but i have no clue whatsoever.... i was told to connect my box to the computer hot do you go about it? Can you please offer any help please.......
 
You can't watch any scrambled channels from Hotbird without valid subscription.
 
Ok, He can watch mezzo if he wants.;)
 
And a ruddy good channel it is too.

_http://www.eurotv.com/slmezz.htm
 
Back
Top