Just Sharing This TM5402HD Ch list by William-1

william-1

william-1

Super Moderator
Staff member
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
My Festive TM5402HD Ch list by William-1 for Dec 8th 2016,

All transponders updated 53 east to 30 west,

You can also use this list for TM5402HD M1- M2 -M3 - F3/5 & TM6800HD Super,

Also other receivers that use the NDF file system such as ClarkeTech, Strong, DrHD ect,

This is a Motorised channel list for 53 east to 45 west you can also use this list for fixed dish set ups.
 

Attachments

Last edited:
TM5402HD Ch List by William-1 for 8th Feb 2017
Full update for 28.2 east,19.2 east & 13 east most other satellites are up to date.

90cm dish used for this update so only 9 transponders for Badr-4 @ 26 east.

You can use this list for TM5402HD M1- M2 -M3 - F3/5 & TM6800HD

Also other receivers that use the NDF file system such as ClarkeTech, Strong, DrHD ect

This is a Motorised channel list for 53 east to 45 west you can also use this list for fixed dish set ups.
 

Attachments

Update for 28th May 2017

TM5402HD Channel List by William-1

53 east to 45 west All transponders updated

New BBC Red Button service for Wimbledon added to 28.2 east

This channel list is suitable for all single tuner satellite receivers using the NDF file system,

TM5402HD M1, M2,M3 & TM6800HD
Blade 7000s, DrHD D15, DrHD F16, +Clarketech & Strong.

This is a Motorised channel list for 53 east to 45 west you can also use this list for fixed dish set ups.
 

Attachments

Technomate TM5402HD Channel List by William-1
July 3rd 2017 all satellite transponders updated

Quest,Quest+1,Quest Red,Quest Red+1 Free to air on 28.2 east
BBC Red Button Ch 392 to 398 For Wimbledon Tennis

For more channels just re-scan any satellite.
This channel list is suitable for all single tuner satellite receivers using the NDF file system:-

TM5402HD M1,M2,M3 & TM6800HD
Blade 7000s, DrHD D15, DrHD F16, + Clarketech & Strong.
 

Attachments

Mod. Note

Thread cleaned.
 
Hi William-1,

I wondered if you can help me,

I loaded the .ndf file onto my Dr HD D15 as a quick way of getting access to the channels on my fixed dish however I have encountered a couple of issues.

Firstly I flashed the .ndf to "Normal DB" then "Default DB" after, I had a little play and all looks good however, I'm unable to completely get the box to how it was before, even if I "factory reset" or "delete all channels" channels and settings still appear even after a firmware flash. Can you help?
Probably because I am struggling with the difference between "Normal DB" and "Default DB" as when I now turn the box on it tries to move my dish until i turn USALS off.

Secondly I'm now not getting any audio on the HD channels, SD are fine, very odd.

Kind Regards
Statalite
 
Try a factory reset then reload the channel list.
 
After I do a database reset the D15 immediately tries to go to Thor 5/6/7. It then realizes there is no signal on my fixed dish. I flashed the file again to both databases but each time the box is looking for Thor 5/6/7 I suspect as "Music Channel" is on this satellite in the channel list.
Currently its not showing me any signal on anything.
Confused as to how to get it back to how it was before the first flash?
 
statalite said:
After I do a database reset the D15 immediately tries to go to Thor 5/6/7. It then realizes there is no signal on my fixed dish. I flashed the file again to both databases but each time the box is looking for Thor 5/6/7 I suspect as "Music Channel" is on this satellite in the channel list.
Currently its not showing me any signal on anything.
Confused as to how to get it back to how it was before the first flash?
Click to expand...

Have you tried changing the diseqc options, using some of Williams list, I can some times have a diseqc issue with my dr hd d15
 
Whatever I do it comes up no signal. I know there was signal, any now it's gone, I have not removed the satellite cable and no bad weather etc.
If i reset anything William's settings are always retained.
 
I seem to have had success with deleting the channel list totally, turning off any motors, scanning my own list just for 1 satellite, retaining william's transponder lists. At least I get a signal showing now.:)
 
Thanks Chris1979 I'm sure i will find the blank file useful in the future.
 
Does anybody happen to have a backup of the original shipped .ndf database for the D15?
For piece of mind it would be nice to have this back.
 
statalite said:
Does anybody happen to have a backup of the original shipped .ndf database for the D15?
For piece of mind it would be nice to have this back.
Click to expand...

If you do a factory reset then go to satellites you will find the original database.
 
This does not happen for me for some reason even after saving a blank database to both options the doing a "factory set". :(
 
Maybe the DrHD D15 does not support all the functions of the TM5402HD M1 & M2 series.

I think on reflection the TM5402HD M3 & F3/5 are the same build as the DrHD d15 so you will not be able to find the original data base this way.
 
TM5402HD Channel list updated today,

53 east to 45 west all satellite transponders updated,

Use this channel list with these receivers using the NDF file system:-
TM5402HD M1,M2,M3,F3/5 & TM6800HD
Blade 7000s, DrHD D15, DrHD F16, + Clarketech & Strong.
 

Attachments

Hello William
My tuner is Technomate TM-5402 HD M3CI, I'm from Poland. I sincerely ask you for a 2017 channel list from 60 East to 45 West because on polish forums I couldn't get any help. I would be grateful if you could help me.
 
Back
Top