Transponder lists for Transedit.

Huevos

Huevos

Satellite Freak
My Satellite Setup
57E to 58W, C-band and Ku, DVB-S2, 4:2:2 and blindscan.
My Location
38.5ºN, 0.5ºW
Anyone interested in trying these out before I release them. Main feature is the transponders have a proper description.
 

Attachments

Huevos said:
Anyone interested in trying these out before I release them. Main feature is the transponders have a proper description.
Click to expand...

Morning 'H'.....hope all is well with yourself.

Good work thanks. Not much time of late but just running your .ini of 28.2ºE using DVB Dream v2.8 with DVBSky USB on this occasion
......seems a treat. respect-048.gif

Be safe.

Capture.webp
 
Thanks LP,

Can you check an S2 transponder loads right in that program please. Say 10847V. Check it lists as 8PSK.
 
Quick run on another laptop with 47.5ºW with DVB Dream 2.8.1 and TBS USB.
.....again, thanks. :-applause

Captura.webp

4027 L 9600 Record HD
Captura2.webp
 
Huevos said:
Thanks LP,

Can you check an S2 transponder loads right in that program please. Say 10847V. Check it lists as 8PSK.
Click to expand...
ok,will do when I have 5 mins....thanks.
 
Huevos said:
Thanks LP,

Can you check an S2 transponder loads right in that program please. Say 10847V. Check it lists as 8PSK.
Click to expand...
Sorry for rush 'H'.......off to Notary.................thanks.........results show:-

Capture3.webp
Capture2.webp
 
Hmm. Shows QPSK in that grab. Maybe your program doesn't understand Transedit flags.

UNTITLED.webp
 
Huevos said:
Hmm. Shows QPSK in that grab. Maybe your program doesn't understand Transedit flags.

View attachment 90231
Click to expand...
DVB Dream plus and minus at times....................looks fine with SmartDVB.......well done, cracking job 'H'. respect-048.gif

Auto FEC
Capture4.webp

'auto fec'.....unchecked
Capture6.webp

Capture5.webp

Capture7.webp
 
Thanks LP. I guess the INIs for one program aren't 100% compatible with the others.
 
Huevos said:
Main feature is the transponders have a proper description.
Click to expand...
Alas, they don't. The modulation parameters of Transedit include Pilot and Roll Off for DVB-S2. Here you see the difference for 23.5E, 11739V.
 

Attachments

  • Snap45.webp
    Snap45.webp
    26 KB · Views: 5
  • Snap46.webp
    Snap46.webp
    28.1 KB · Views: 6
BF, the default "should" scan that fine. Problem is there is no complete list with pilot and roll-off included. Only way to get that info is by scanning the SI tables. Kind of chicken and egg. Need the correct data to scan the transponder. Can't scan the transponder without the data. Fortunately that is not true. Just takes a little longer to lock using the defaults.

Anyway data is from Lyngsat but neither pilot nor roll-off is listed on that site, nor any other by the look of it. Any idea where to download that?
 
Problem is there is no complete list with pilot and roll-off included. Only way to get that info is by scanning the SI tables.
Click to expand...
This is only partly true. The actual parameters are transmitted in the BBHEADER. The Satellite Delivery System descriptor in the NIT shows the roll-off factor but not pilot. Some older DVB-S2 cards needed a correct pilot setting. Normally it's done automatically by the demodulator.
 
BlindFaith said:
The Satellite Delivery System descriptor in the NIT shows the roll-off factor but not pilot. Some older DVB-S2 cards needed a correct pilot setting.
Click to expand...
If it is not listed in the NIT and not listed in transponder lists how is anybody supposed to know the correct setting to enter in the ini file. What I did was pilot on for S2 transponders and 0.35 roll-off. Without a complete source of transponder data I can't see what else can be done.
 
Back
Top