Tutorial :- CCcam Card Sharing

Status
Not open for further replies.
budd131 said:
i am new t this i have tried using the cccam info and still cannot get it to work i need to no if i have to do anything with remote control i have put f line in using a dns server and also put cline i other box just not work any one give me a simple step by step set up ie using coputer and remote control i have a technomate 600 please heeeeeeeeeeeeelp

can any 1 help setting up technomate 600 step by step guide how to share i have tried the info in download just wont work got dns addy put cline in other box f line in mine just wont work do i have to se remote also
Click to expand...

I'm not usre that Technomates are capable of sharing.
 
Thank you for all informations, and the fast and good reply on any
problem, I have a lot to learn, but after the easy and good CCcam.xls
file, I am on my way. One question came up, a 28 digits long des key
or what ever that is, is often involved in Clines or flines, don't know what it is good for, or if I need to use that in a simple cardsharing in
home, I can't see it anywhere in the tutorials, or examples here. So
probably I don't need it, but to give me, and hopefully other noobs,
a simple explanation would satisfy me, and give me a lot. Thank you all.
 
Hello and thank you all.
I made two F:lines like this, very simple.
F: user1 pass1
F: user2 pass2
my C:lines looks as follows..
C:xxxx.dyndns.org 12000 user1 pass1
C:xxxx.dyndns.org 12000 user2 pass2
And now the server listen port as this..
SERVER LISTEN PORT : 12000
The question is should it look like this instead?
C:xxxx.dyndns.org 12000 user1 pass1
C:xxxx.dyndns.org 12001 user2 pass2
and if, should the server listen port be set like this?
SERVER LISTEN PORT : 12000 12001 (12000:12001)
or two lines
SERVER LISTEN PORT : 12000
SERVER LISTEN PORT : 12001
I can tell you that the first user works well, no problem at all, I have not
made any second yet, as I am not sure of the port configuration, and try
to not mess up anything, hopefully it should work with the 12000 port only for both. If you can help, or point me a way to the answer, please...
 
widar said:
Hello and thank you all.
I made two F:lines like this, very simple.
F: user1 pass1
F: user2 pass2
my C:lines looks as follows..
C:xxxx.dyndns.org 12000 user1 pass1
C:xxxx.dyndns.org 12000 user2 pass2
And now the server listen port as this..
SERVER LISTEN PORT : 12000
The question is should it look like this instead?
C:xxxx.dyndns.org 12000 user1 pass1
C:xxxx.dyndns.org 12001 user2 pass2
and if, should the server listen port be set like this?
SERVER LISTEN PORT : 12000 12001 (12000:12001)
or two lines
SERVER LISTEN PORT : 12000
SERVER LISTEN PORT : 12001
I can tell you that the first user works well, no problem at all, I have not
made any second yet, as I am not sure of the port configuration, and try
to not mess up anything, hopefully it should work with the 12000 port only for both. If you can help, or point me a way to the answer, please...
Click to expand...

No the same port is used for both.
 
hearts said:
No the same port is used for both.
Click to expand...

Hi its cutajarcharles well done for your work if the first works the second will works as well the F/lines are good but for the server you have to seperate them the port 12000 its worked but what about port12001you have to install other computer and install the second port 12001 again and the rest so you could work but if you install together you will lose the first server and if something is wrong one of your server is still runing what do you think waiting for your reply Good luck my friend
 
Hello, and thank you for the advice, I am not sure if I know what you are telling me. If I need another server, I think I am only using one
client, and F line, and just the 12000 port, as it seems to be to much
hazzle to start another server, for a 12001 port, I had in mind to use
the same, 12000 port and have two clients, and two F lines on same port. Thank you for your effort, to help me, as I have a lot to learn.
 
this was helpful..thanks
 
Hey. The internet service provider have change the ip of the dreambox server.
Where to find and edit the ip in 7025??


thanks :)
 
hi B16MCC i would just like to say thank you and the other contributors to this thread such as COMPUFUNK. i have personally never looked into CS before however it is a topic that interests me and the tutorials both of you posted here are excellent reading.

so thanks once again, although it seems that some users have not quite grasped the idea of a tutorial thread, instead of making new threads with their individual problems.
 
B16MCC said:
Ok mate, your F lines are wrong. They should read :-
F: dfca defefe 3 0 0 {0:0:2}
F: tyrhrt gregre 3 0 0 {0:0:2}

This will now allow these 2 friends to connect to you.

Your C line will be ok if you replace 'abcd' with a valid server IP address. Then the port that server is listening on needs to be 12300 , then username is 123 and password is fdgvrf
Click to expand...

can you please let us know what do the numbers at the end of the F line translate to? If we do not include them in the F line what happens?
F: user pass 3 0 0 {0:0:2}

Also shall we add something in the C line as well as a result?

Thanks!
 
B16MCC said:
Hey peeps. First and foremost in order to abide by the rules of the forum, this post will not contain nor expand into the trading of card sharing server information. It is meant to hopefully clear up the basic concept of the capabilities of CCcam.

Please find attached a spreadsheet I wrote explaining what you need to do to setup a simple card share. Hope this helps the community.

Regards
B16MCC;)
Click to expand...

Good morning my friend That was a good information I see more close to your CCcam we will keep in touch THANKS AGAIN reg cutajarcharles
 
Hi there guys, I want to ask something about CCcam, a friend of mine has a dreambox and he shares with me all his cards, and I want to share my dreambox to another friend of mine but I do not want him to share with his other friends, so what should I put after F: user pass * * * { * * * }, or is there any other way I can stop him from sharing!??? I tried putting F: user pass 0 0 0 { 0 0 1 }, but he can still share!

Thanx in advance
 
Good morning my friend, THANKS for your pm but you got this problem with your freind for c/sharing, well if you d'nt want him you know what to do at the first time,and by the way is he not your friend because you told me that he is your friend and if I told you to to do c/sharing with me even if I d'nt have local cards what will be your reply I AM YOUR FRIEND YES OR NO and d'nt take any replys from your friends you know why.........and if I wre you I will let him share why not we need each other that whty its call FREE C/SAHARING I hope you do the right thinking,well my friend I hope I was help for you take care and waiting for your reply reg cutajarcharles:)
 
My friend. Where is the box ID to enter? Can be manually. What else do I need to add to this config my server is a sly brazil ndass card, debian computer using smargo smartreader + usb reader.
 
coelhomd

Please remove reference to cable receiver in profile.
 
Hi its cutajarcharles, Thanks for the information re the above well done , ple keep informed THANKS again
 
Hello all! Anyone willing to help and educate a newbie Scouser in a new world via pm??
 
kevinooo said:
Hello all! Anyone willing to help and educate a newbie Scouser in a new world via pm??
Click to expand...

Nobody is going to do any tutoring of newbies using PM's. The information is all there for everyone to see, use the search function and do some reading
Also - please read the rules before posting - as this is a thread dealing with CS we are very sensitive about PM's!
 
Status
Not open for further replies.
Back
Top