Twin Monoblock LNB

M

Mickey C

Member
My Satellite Setup
Labgear hdsr 300
My Location
MiktonKeynes
I had set up my free sat labgear dish and receiver all working perfectly. I have now changed the LNB to a mono black twin LNB still using the single cable I have managed to still keep a strong signal for asta 2 but there is no signal for the hot bird satellite is it still a matter of moving the dish until both LNB,s show a signal For both satellites. Can anyone help
mickey c
 
I dont think they make 15 degree monoblocks do they?

If its a fixed head lnb they are typically 6 degrees for 19E/13E. In any case post a pic & someone will be able to help :)

PS welcome to the forum
 
If the Monoblock is a fixed one, then these are mostly set for 6 degree spacing, so you cannot get Astra 2 and Hotbird ..... The usual application is Astra 1 (19.2E0 and Hotbird.

Even the new-fangled adjustable Monoblocks only go up to 12 degree separation.
 
AS: Snap

Mickey: I've Edited the Thread Title a bit
 
Thank you to everyone I will try adjusting to Astra 1 and hotbird or if that does not work buy the LNB suggested
 
Back
Top