Wall mount

[hibees04]

can someone recommend a wall mount for a 1.1m triax dish and motek motor?

regards

 

[hexah]

T&K brackets, 2" pole.

 

[wod]

yes t&k brackets size depending on what your due south wall is like to the position of the satellites.

i use 24inch because of this.

make sure you use very good, strong fixings like sleeve anchor bolts over them bolts with plastic sleeve plugs

 

[satelliteman]

Galvanised bracketry also.

 

[Lazarus]

My wall faces about 15W and 12" T&K are absolutely fine for a 1.1m dish, so as wod says, size required depends upon the orientation of the house as well as the dish size.

The "stand-off" is, of course, increased by interposing the motor.

BUT: I should think twice about hanging the TD110 in an exposed location on a Moteck Motor. It isn't likely to last very long owing to the significant weight of the motor and the potential wind loading.

Either go for a lighter dish like a Gibertini 1.04m, or make sure the dish is mounted in a sheltered spot.

 

[sonnetpete]

Just to concur with the others. My dish/motor is on T&K's, though on a quite sheltered, almost due south facing wall. I've noticed less movement in high wind with the Gibertini than my previous Triax TD88

Pete