buzzbomb
Regular Member
- Joined
- Jan 1, 2000
- Messages
- 65
- Reaction score
- 0
- Points
- 0
- Age
- 75
- My Satellite Setup
- protek 9600ip Openbox S9 HD 1.8m precision dish and standalone 36v positioner.
- My Location
- scotland and greece
Excuse my ignorance of sky boxes but my daughter wanted me to connect her sky+ hd box (Thomsons) to another room so my granddaughter could watch one of the kids channels while her parents were watching another channel on the main tv.
Read thro the forum and thought I only had to run a coax from the rf2 output on the +hd box to the 2nd tv. Did this and tuned the second tv into carrier 68 and got the picture ok. When I did this I thought that because the box had 2 tuners the rf2 output would have been the channel that the pvr was on but it appears to be the same channel as the one the main tv is on. Tried using rf1 but that to was the same channel as the main tv.
Am I doing something wrong or is it not possible to do what I want ?
As a matter of interest I tried to access the installer menu via services-systemsetup - 01 but nothing happened.
All suggestions welcome
Read thro the forum and thought I only had to run a coax from the rf2 output on the +hd box to the 2nd tv. Did this and tuned the second tv into carrier 68 and got the picture ok. When I did this I thought that because the box had 2 tuners the rf2 output would have been the channel that the pvr was on but it appears to be the same channel as the one the main tv is on. Tried using rf1 but that to was the same channel as the main tv.
Am I doing something wrong or is it not possible to do what I want ?
As a matter of interest I tried to access the installer menu via services-systemsetup - 01 but nothing happened.
All suggestions welcome