What do I need if....
- Thread starter borge14
- Start date
Robbo
Retired Mod
- My Satellite Setup
- TM6800HD, TM1000, TM600 Linux,TM2200 motor, Channel Master 1.2m motorised, TD110 dish Meter=Satlook Micro+G2 NIT
- My Location
- Gravesend,Kent,UK
Hi,
You can do it with a twin LNB with a motorised dish, but it would be problematic as far as the Sky receiver goes as it will keep losing signal from 28E.
The best option is a two dishes, one small one for Sky, plus a motorised dish.
Or you can have one large fixed dish with two LNBs on it, for 28E and 16E.
Robbo
You can do it with a twin LNB with a motorised dish, but it would be problematic as far as the Sky receiver goes as it will keep losing signal from 28E.
The best option is a two dishes, one small one for Sky, plus a motorised dish.
Or you can have one large fixed dish with two LNBs on it, for 28E and 16E.
Robbo
- My Satellite Setup
- See signature
- My Location
- Northants, Midlands UK & Lanzarote, Canary Islands
If you don't want to go motorised route and only want the one dish then as already discussed -
Install an 80cm dish aligned to 16e.
With the use of an LNb multi bracket, you can then install another LNb for reception of Sl<y at 28e. Two cables, one for DigitAlb and one for Sl<y receiver.
SM
Install an 80cm dish aligned to 16e.
With the use of an LNb multi bracket, you can then install another LNb for reception of Sl<y at 28e. Two cables, one for DigitAlb and one for Sl<y receiver.
SM