wich cam will work with a polsat nagra card

[master-magic]

i am searching for a solution,
i have a original card of polsat nagra that have channels on hotbird 13 east,
there wass a cam with because the card is paird to the cam,
but because i don't have a CI can i not watch that card,
have somebody a solution to watch that card,
i have tried with CCcam but no go,the card is not found,
or must i put the camkey in de CCcam.cfg file.
i hope that someone can help me,
thx in stead.
and greets

 

[compufunk]

I'm not sure about DM-800, But CCcam should do it (I thinkk).

2 things to check,

1: Make sure CCcam is running, Go to Blue Panel, Select CCcam, and select restart Camd. You should be able to tell if CCcam is running by pointing your browser at your dreambox, http://dreamboxip:16000

eg http://192.168.1.101:16000

2: Are you sure you have the card in the right way up?

I cant see why the card would not work considering Pols@t can be cleared with a combination of keys and CCcam.

There was another member who had a DM-500 i think, and the card reader cable was disconnected inside his DM, I'd leave checking that as a last resort though.

 

[master-magic]

i did check it on the dreambox CCcam and on my pc server CCcam and both are the card not found,
i think the card is paired with the cam.
and my seca cards are been readed in DB800,also my irdeto euro1080 card,so there is no problem with cardreader.
i hope tehere is somebody taht can tell me more what i else can do,
there must be a solution for that problem.

 

[mhku]

http://dreamboxip:16000

The port is 16001

 

[master-magic]

i using 2 years allready CCcam,i now verry good CCcam,
but never used something else of cam,
i now where i can find it,but the card is not found when it is on the card reader,and in the dreambox the same result.
somebody have told to me it can be that i have to put the box id and serial in Cccam.cfg file.

 

[compufunk]

The port is 16001

Ooops, the old memory is not what it once was