Recent content by Alex2

You can set that part of the motor up at ground level.

The first time I put up a 2600 motor I made a stand on the ground. It is essential to have a straight pole, and when pointing true south, and looking behind the motor, the dish is in line and the LNB arm is straight. If this is right you can program the box to any strong satellite in your...

No, but I setup my moving system using the FS1 with no problems. I just programmed the meter, and obtained a reference Sat and picked up the Sats I wanted.

I tried the 6908, and I thought it was crap. I sent it back to China and I bought the FS1, which has been brilliant. I found the sensitity on the Satlink so poor, it would be easier to find a sat with a £10 meter.

Usually once they start charging, they will gradually cover everyone using it.

I bought the Sat link 6908, after doing tests on a twin LNB with a Motorised system that was ok. I found it to be crap. Slow to respond, even downloaded the programs took too long. Sent it back and bought FS1 which I am very pleased with. The 6908 seems impressive until you compare it with...

I have had my FS1 for months and is very good, set the motorised dish up wihin 15 mins. It will not tell what Sat you are on, but I found if I configure it. It indicates by locking on to that Sat I want. It is very responsive.

Just mark the position of the LNB with a pencil, before you move it.

und Searching... You can put the tuner on advance settings used for motorised dish, on a fixed dish and use the the postioner set up to manual tune.

They are here already, they are called politicians. They live in a differnt world to humans, and tell lies when they open their mouths.

if it is an Satlink ws 6908, I tried it found the response to be rubbish. I sent my back to China at a cost of 15 pounds, for a refund. I have posted about it in this section.

You are talking in riddles, if you line the dish with clear sight at 28.2 E, it does not matter what lat or log you put in the receiver. You should pickup the channels. If you motorised it is best to say what you are doing. Use dish pointer =http://www.dishpointer.com to find out your...

Well don't use usal, I have tuned to 4 sat's without using them. I tweek the vbox for the best signal, and gave them a position number. es sich um eine Position Searching...

Having tested 6908 meter for 2 days, connected to a twin LNB on a motorised dish; the verdict it was rubbish. S response and tone was poor. It even shown about 40 percent when I moved the dish and the picture froze. Q was also all over the place. I even placed a sat finder in line with it, and...

You could use a FTP program to the file, and open it with computer notepad. Just copy and paste the infor, and close it.