Recent content by IjonT

  1. I

    Firmware for Opentel 3600 in 3500?

    Is it possible to download the firmware for Opentel ODS 3600 to the Opentel ODS 3500 somehow?
  2. I

    any emu for this receiver

    If the warranty of your receiver expired already, you could open it and try to find some description on the circuit board.
  3. I

    any emu for this receiver

    Check http://www.satellite-heaven.de/ or http://sat-receiver-world.com/pi503380735.htm?categoryId=270 for the list of Nextwave receivers.
  4. I

    Hotbird Problems

    It was just an idea. You should always try to adjust the LNB skew because of the polarisation offset of the satellites. It doesn't have much effect normally, but it can help with some LNBs and satellites. Just turn the LNB slowly and see if the signal quality increases or decreases and try to...
  5. I

    Hotbird Problems

    What about your LNB? (Have you tried another one or to change it's skew?) Are you using quality cable?
  6. I

    Correct LNB Skew Value

    I've found following information on one website: On some satellites the polarity angle can be offset from the calculated one. On the France Telecom Satellites there is a polarisation offset of 20 degrees from the calculated ones.
  7. I

    What LNB do you recommend?

    My experience: I have better signal quality with much cheaper SRT J21N 0.6 dB LNB than with Golden Interstar GI-201 0.3 dB.
  8. I

    diseqc 1.0 und 1.2 what is the difference

    Built-in positioner has nothing to do with DiSEqC. You need to update your receiver to DiSEqC 1.2 if it is possible.
  9. I

    diseqc 1.0 und 1.2 what is the difference

    Only a switch can be controlled with DiSEqC 1.0, not a motor (as far as I know). You need DiSEqC 1.2 for a motor. But if your receiver has some menu items for motor setup then it has probably DiSEqC 1.2 anyway. Why not try it and see, what happens?
  10. I

    Eurosport in English on Asta1 with Humax F2-Free

    But you asked about Eurosport in English. Eurosport in German is FTA and you can receive it with Humax F2-FREE, of course.
  11. I

    A Moteck question.....

    How big is the difference? Almost certainly not. You should set the motor tube to 0° manually (using pushbutton on the motor) and then reset the motor as described in the manual (I have not tried this but it is written in the manual). (But you will lose all saved satellite positions if you...
  12. I

    seteditor for no-name receiver

    Are you sure that your receiver does not have it's own settings editor? It can be some rebadged version. You can find most of satellite receivers on www.satellite-heaven.de along with links to their manufacturer's websites.
  13. I

    Eurosport in English on Asta1 with Humax F2-Free

    Humax F2-FREE is a digital receiver and audio channel 7.02 applies to the analogue channel. You can not receive analogue channels with digital receiver. All Eurosport channels in English are encrypted and you can not receive them with Humax F2-FREE (as long as I know). You need another receiver...
  14. I

    sly sports 1 fta

    All channels on this transponder are unencrypted at the moment. But I have read on one german forum that some receivers can not receive them.
  15. I

    Basic dish installation

    I have noticed that offset dishes of different makes can appear to be different up-tilted even if pointing to the same satellite. So this does not have necessarily to be wrong. You can find the right elevation of the dish on the motor simply by trying to locate your southernmost satellite. Or...
See more
Top