Glad you sorted it.
However if you were working on the voltage side of a device, you could of damaged it.
Simple rule Check, Check & re-Check..
zac2613
Hi Wickedcid
If you followed the diagram instructions, you should have no problems, however as you don't upload to the meter often, did you make sure you set the com port correctly.
zac2613
Hi LarryGB
I hoped that it would work for you.
Ill say one thing recently i tried downloading an altered dataset in to the meter, and it would not go, it didn't mater what, so i left it, then one day i tried it again and it worked, more than once ?????? the only thing i could think of that was...
Hi HarryGB
If your meter probes won't fit into the holes, just use a needle.
Ive tried to locate the problem but cant/won't touch the Smt's, with a normal iron, so having to read components in situ, and is not the best way.
If you look at your diagram, the fly leads are connected to pin 1 & 5...
Sorry Harry, but i tried editing the diagram, but it wont stay were i put it, look at the meter so the power socket is to the right of the data connection, when looking at the meter, also look at the diagram as if its a circle, you should get my drift.
zac2613
Hi LarryGB
If you look at your meter's din connector, not the din plug, rotate the meter till it looks like the diagram below, it should look like this.
bbbbbbbbbbbbbbbbbbbbbbbbbbb *--*-----------------Flying lead
bbbbbbbbbbbbbbbbbbbbbbbbbb * ----*
bbbbbbbbbbbbbbbbbbbbbbbbbbb...
Hi LarryGB
It didn't work in the end. but i did find a way, have you made the lead yourself, can you take the D serial plug apart, if so let me know and i'll explaine Here what i did to get the dataset into the meter.
zac2613
TO WHOM THIS MAY CONCERN
Wolsey and Lacuna are the same meters
I had the same problem (Send new line 0) and fixed it myself (not complicated to do) JUST A RESISTOR
If you have the tool to take the back off the meter and know how to use a soldering iron.
Contact me
IF I THINK YOUR UP TO IT ILL...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.