1 of 14 Flats & Signal Quality = 0%. LNB Setup Trouble?

[rolfw]

Hmm, that seems OK, where it says at the bottom "Obtained from NIT information", that would indicate that the card has read the satellite. I'm wondering if it's a Media Portal problem.

 

[EViS]

I'm trying to scan with ProgDVB atm. Can't get a single thing. Trying all sorts of options. The previous 'Lost Channel' list doesn't even appear any more ...

 

[EViS]

Got my hands on a Goodmans Freesat Box and it scanned all channels in a matter of seconds! All channels show 100% signal and 100% quality...

This narrows it down to the settings and card.

Anyone have any ideas on the settings I require?

 

[Lazarus]

Great news that the feed is ok. I'm glad my earlier fence-sitting wasn't justified!

I've never used a PC Card for DSAT but presume that like a box you need to make LNB settings somewhere.

Unless I'm mistaken, even though your feed is from a Multiswitch, as a user you just treat it as a Universal 9750/10600 LNB.

Check what settings you actually have in that respect.

 

[EViS]

Fantastic news. After uninstalling the card's drivers, removing the card, reinserting it into the same PCI slot, reinstalling the drivers, WinTV & ProgDVB found all the channels. But MediaPortal was still showing 'no signal'. A re-installation of that has also fixed everything . The settings were the default ones. i.e. 'No Diseqc' and Universal LNB.

Thankyou very much too all of you who offered me advice throughout .

 

[satelliteman]

Nice result

 

[Lazarus]

Seconded