Captain Jack
Burnt out human
- Joined
- Oct 21, 2006
- Messages
- 11,812
- Reaction score
- 7,995
- Points
- 113
- My Satellite Setup
- See signature
- My Location
- North Somerset
I don't think there's anything off the shelf for Sky minidishes. You'd have to fabricate something yourself... with zipties and duct tape if need be (as a "temporary" measure).
One thing I'd suggest first, is removing both LNBs and try to find 13E and 19.2E without fixing LNBs to anything. Align the dish to 13E (as it is now?) and move the LNB with your hand to find 19.2E. It should be just a couple of cms away.
Another potential solution is to align the dish to 16E as your prime satellite but then setup the two LNBs offset to 13E and 19E. Doing it this way will increase the gap between the two satellites. Again, you'd have to fabricate something yourself.
One thing I'd suggest first, is removing both LNBs and try to find 13E and 19.2E without fixing LNBs to anything. Align the dish to 13E (as it is now?) and move the LNB with your hand to find 19.2E. It should be just a couple of cms away.
Another potential solution is to align the dish to 16E as your prime satellite but then setup the two LNBs offset to 13E and 19E. Doing it this way will increase the gap between the two satellites. Again, you'd have to fabricate something yourself.