moonbase
Small Dish Man
- Joined
- Mar 29, 2004
- Messages
- 4,373
- Reaction score
- 4,479
- Points
- 113
- My Satellite Setup
- .
- My Location
- UK
Satellite: Intelsat 19 @ 166.0E
Reception Equipment
2.4m Prodelin dish
1 x Acer Quad Output PLL LNBF - Sidecar mounted on Prodelin dish (Prodelin central satellite is 160.0E)
TBS6902 DVB Card
Octagon SF8008 Receiver (Open ViX image)
Notes:
1. The H/V polarities are currently reversed, the LNBF needs to be adjusted by 90 degrees to get correct polarity readout.
2. The frequencies registered by the Octagon SF8008 are 100MHz lower than the true values.
I had issues configuring a custom LNB setting for this specific LNBF in the OpenViX image. A Universal LNB setting was used with L.O. of 10.6GHz rather than the true LNBF L.O. of 10.7GHz
This setup is work in progress.
I think there are improvements to be made, possibly with the use of a Prodelin 1244 feedhorn modified to accept a C120 LNB for the sidecar.
.
Reception Equipment
2.4m Prodelin dish
1 x Acer Quad Output PLL LNBF - Sidecar mounted on Prodelin dish (Prodelin central satellite is 160.0E)
TBS6902 DVB Card
Octagon SF8008 Receiver (Open ViX image)
Notes:
1. The H/V polarities are currently reversed, the LNBF needs to be adjusted by 90 degrees to get correct polarity readout.
2. The frequencies registered by the Octagon SF8008 are 100MHz lower than the true values.
I had issues configuring a custom LNB setting for this specific LNBF in the OpenViX image. A Universal LNB setting was used with L.O. of 10.6GHz rather than the true LNBF L.O. of 10.7GHz
This setup is work in progress.
I think there are improvements to be made, possibly with the use of a Prodelin 1244 feedhorn modified to accept a C120 LNB for the sidecar.
.