2 Twin LNB Set Up Help Required Please

[dbaileyuk]

Could you please tell me how to set my 8000 up to work with 2 dual LNBs
I have one at 19 degrees ( the main one ) the other is at 13 degrees.
I have taken one lead off each lnb to one disecq switch, 19 deg goes to A
13 deg. goes to B
I have done the same configuration with the other disecq switch.
The outputs connected to the tuners on the 8000.
If that is correct how do I set the 8000 up to work ?
Are the settings done in the, Setup > Service Searching > Tuner Configuration
panel ? or there a bit more to it than that ?
I am running Black Hole.
Thanks

 

[mick666]

you have to setup the tuner config in the box , tuner a and tuner b , there are several options , advanced , motorized single.
i got mine on advanced because i use 8 twin lnb's connected to the box
then you have to input the ports of the switch to to satellite it's connected to.

 

[mick666]

just a screenshot added to see how it's setup , you must set the lnb aswell example mine ( third lnd is the astra 19,2 )

 

[dbaileyuk]

Thanks mick666,
I will have another look at it and see which settings will work