hi i am having trouble can seem to get more than i receiver working i have dm500s as server reading white card plus tm500 as receiver both working ok but when i add another tm500 with different user name and pass in c line and f lines matching i am getting nothing cant get both to work at the same time please help
2 x c and f lines not working
- Thread starter hard2bare
- Start date
teide_ian
Regular Member
- My Satellite Setup
- Home-Amstrad Sky Digi-box on 60cm dish. Bar - Pace Sky English Digi-box and Grundig Sky Eire Digi-box linked to a 2.4m Channel master dish with a single dual output LNB. Digibox for ART network on 90cm dish. Digibox for Digitalalb subscription. Di
- My Location
- Canary Islands
Are u putting 2 f lines in the server box with a cline each in the technomates?
i.e
F: user pass
F: user2 pass2
tm500 box 1
C: 192.168.x.xx port no user pass
tm500 box 2
C: 192.168.x.xx port no user2 pass2
check obviosly router setup and ip setup on boxes.
i.e
F: user pass
F: user2 pass2
tm500 box 1
C: 192.168.x.xx port no user pass
tm500 box 2
C: 192.168.x.xx port no user2 pass2
check obviosly router setup and ip setup on boxes.
teide_ian
Regular Member
- My Satellite Setup
- Home-Amstrad Sky Digi-box on 60cm dish. Bar - Pace Sky English Digi-box and Grundig Sky Eire Digi-box linked to a 2.4m Channel master dish with a single dual output LNB. Digibox for ART network on 90cm dish. Digibox for Digitalalb subscription. Di
- My Location
- Canary Islands
Yes it is.
I have had c lines where the user pass are too similar where 1 box will work for say a minute then freeze then the other box starts working fine.
Using the above setup i have had around 5 or 6 boxes working perfectly.
I usually setup different ports for each box even though there just receiving in router not sure if this is necessary as when i did this i had more than one card so had to setup this way.
I have had c lines where the user pass are too similar where 1 box will work for say a minute then freeze then the other box starts working fine.
Using the above setup i have had around 5 or 6 boxes working perfectly.
I usually setup different ports for each box even though there just receiving in router not sure if this is necessary as when i did this i had more than one card so had to setup this way.