28.2 & 19.2e on a TD64

Tony1A

Tony1A

Never going back to Sky TV. Ever!
My Satellite Setup
Humax HDR1100S Freesat Recorder. Octagon UHD satellite box with Gibertini 1m motorised dish. Triax TD78 for Freesat. Triax TD64 for Freesat to 3 rooms. 2 Panasonic Freeview+ HD recorders.
My Location
North-East England, UK
HI EVERYONE

I want to use my current TD64 dish (28.2) and change it to a dual feed system as I want to put a box in the bedroom on 19.2e. Which satellite do I align the dish on so that I can bring in 19.2 and 28.2 satellites?

Thanks in advance all :)
 
I shouldn't think it matters much, owing to the strength of those Birds.

You could set up on either one or at a mid-point.

Best to experiment.
 
How about if I aligned the dish on 23.5e and then brought both of the birds in "on the bounce" so to speak?
 
Yes, that would do it.

But why not start by leaving the dish aligned to 28E and hang an offset LNB for 19E, to see if you really need to re-align at all?
 
Good point! I have a Triax multi LNB bracket so I'll use that. Food for thought. :)
 
From a fresh install, I would focal on 19e and offset 28e. I remember the old TAS 60 dishes where a offset bracket for this was standard.
 
Back
Top