4 Sat with DiseqC and Split problem

P

PcRestorer

Member
My Satellite Setup
4 Dishes (Hotbird, Neilsat, Sirus and Turksat) with 4 diseqc in 4 room 4 satallite at the same time
My Location
Cyprus
Hi Dear All,

I have 4 fixed dished ( Hotbird, Turksat, Neilsat and Sirus) this dishes have quad lnb connected to 4 diseqc and from diseqc's 4 cable goes to rooms i can watch in 4 rooms 4 satallite without any problem but now my boss wants one more tv to one of room for wath 2 different sat. channel at the same time i tried to use a 1 in 4 out splitter but i could not see any signal value from outputs i asked to one sat. setuop shop they says Splitter not works with DiseqC is it true if true how i can split 1 cable ( comes from DiseqC) to 2 cables ( goes to receivers)
 
Change all 4 LNBs to octo (with 8 independent exits), add 2 diseqc and run 2 cables to your boss's TVs. If boss wish that than he could spend some money.
 
Thank for reply it's worst for me because cable way is very small it was realy hard. And run 2 more cable this is worst idea to me =) i have one more idea i will connect a TRON Tv modulator then connect tv's from S band is it works you think ?
 
I do not know about modulator, but another way is change LNBs to Qattro and instead of all diseqc use multiswith, in that case 4 cables running in to the house.
 
Ok i will try thank you again
 
Back
Top