46E (Azerspace 1)

[Archived-1]

i am using an old technomate 1500 c/j, @ laser you wont get anything from it its a data channel m8.

 

[Laser]

Thanks for letting me know it's a data channel. Good to see a strong signal though. Just gone off as I am typing this ....

 

[Archived-1]

yes indeed nice to see strong signals, do you get the 10.975h 28.500 tp

 

[Laser]

Just tried again 10975H 28500.... Not a whisper. Too far south I guess.

 

[BlindFaith]

seems to be off again. No signal here on 11134H

10975H shows a signal but apparently not enough for a lock

 

[Archived-1]

yes signal went when laser was typing blindfaith on 11.134, i keep checking 10975 no chance of a lock only 20%.

 

[Laser]

Be interesting to see which channels pop up on the European Beam :-shifty

 

[Analoguesat]

Not a squeak here this evening

According to a post on DS 11175H 10000 was reckoned to be active earlier but nowt on that one either.

 

[Analoguesat]

11134H 10000 just lit up again -
SI 90%
SQ70%

80 cm dish

No channels on it.

 

[BlindFaith]

100% null packets!

 

[Laser]

Yes. 11134H 10000 on again.
Signal level 98%
Signal Quality 82%

With the 1.2 C.Master

 

[Captain Jack]

I reckon my Uno doesn't know what to do with this odd transponder... Strange that everyone else is getting this except me. Laser - where are you based?

 

[BlindFaith]

This is an empty carrier. Without meaningful PIDs scanning will fail. You have to use an analyser like TSReader or TransEdit.

 

[Captain Jack]

Right, but I should still be able to "lock" the signal, right? I.e. the modulation is still there to latch on to.

 

[Archived-1]

i just monitor it like this,

 

[Laser]

Doesn't seem as strong today. Only 68% SQ on 11134H 10000 on CM 1.2m

Captain Jack. I am based near Gloucester

 

[Captain Jack]

OK, well I am in Bristol, so not really that far away from you. I guess I need a better receiver to show me quality even if it's not locked. Enigma2 receivers won't do this.

 

[Analoguesat]

It was showing 70% on my F3 again earlier. Still no channels scanned tho.

 

[Captain Jack]

Anyone seeing a lock on an Enigma2 receiver?

 

[Archived-1]

i dont think we can lock this c/j ? its just a case of monitoring it with db or % are better devices ?,

your post here is showing some signal @ 4.5 db on the 30.5e thread

http://www.satellites.co.uk/forums/topic/158239-305e/?p=840265

input the tp and see what you db shows,

unless i have got this all wrong sorry if so :{ are your not getting any db ?.