Ac135w - anyone know anything about this dish

Manikm909

Small'ish Dish Man
My Satellite Setup
Channel Master 1.8M on Edision MIO 4K & GTMEDIA Combo, and CM1.2M on Octagon SF8008
My Location
Kent, UK
seems to be a contender in the 1.2m + range ....

ive ruled out Gibby 125 due to weight, but found this dish on:

cant find out the weight tho...
 
"Acier" in the title almost certainly means that it's made of steel (acier is the French word for steel!) - so it won't be "lightweight"!
 
In addition: Triax, as usually cheating.... not giving offset angle of the reflector, not giving exact size of horizontal size of the working area. I have no doubts, it is simple 1.2m antenna with unknown weight.
 
Another TRIAX "3+ hands" jobbie ????

And, if it's only that weight, then probably quite thin metal, and thus liable to damage??

Lol the azel bracket looks OK
 
"Label" is 2Galli's budget range. I can't see it being anything other than weighing in on the heavy side. Also, check out the image of the rear pole mount. It's okay for either on the top of a pole or an upward pointing motor stub, but would require some modifying if you wanted it mounting on a 'normal' motor.
 
so play it safe and get the laminas... :) roger.
 
"Assembled Weight: 9.5Kg "
I'd say that is correct. Good dish for the money, but have a look at this tweak, which enhanced the signal by many dB's.
 
this dish looks alot like a primesat 1.3M. well i have one of these where i could not get a diseqc motor to mount due to the rear mount bracket not allowing tilt correctly. so i used the mount plate to fix my gibby and dish and rear bracket now just laying around. the other issue i found is that the rear bracket did not fit great on the dish. i still say go for the gibby but weight wise triax TD110
Satellite dishes.
 
Back
Top