Bott
Member
- Joined
- Jan 3, 2007
- Messages
- 10
- Reaction score
- 0
- Points
- 0
- Age
- 59
- My Satellite Setup
- Sky Panasonic TU DSB 40
- My Location
- Varna Bulgaria
Hi I've been given a 2.4m dish the problem being it was blown off a 4 story building having had some panel beating experiance with cars i have straightened it out i have got the basic shape more or less right what i want to know is
1, does the dish surface have to be perfectly smooth as there are hammer marks in1 area of it if it does could i use filler and sand it down.
2. the main damage was over a 2ft x 1ft area on the edge when i mount the dish would i be better having this damaged area at the bottom or top or would this make no differance
thanks in advance for all help given
1, does the dish surface have to be perfectly smooth as there are hammer marks in1 area of it if it does could i use filler and sand it down.
2. the main damage was over a 2ft x 1ft area on the edge when i mount the dish would i be better having this damaged area at the bottom or top or would this make no differance
thanks in advance for all help given