After all, Official Sky Card works on Dreambox?

J

jruthes

Member
Messages
8
Likes
0
My Satellite Setup
Dreambox 500s and
Dreambox 7000s with
Official Sky Brazil Card (NDS Videoguard)
CaID 0907 and 0942
My Location
BR
#1
I have two dreambox. One is DM 500s and another is DM 7000s 80GB. I´m more than two months trying to get it work using my Official Sky Card.
I tried Gbox, newcs, mgcamd, newcamd, blablabla.

On NEWCS ( reinit card )
On GBOX
nds1_s: error:
nds-e1: no echo
reinit NDS

I think that here in Brazil is the same European cryptography system, but different CAID.

CAID 0907 NDS Videoguard
CAID 0942 NDS Videoguard

Here is my ATR

ATR: alpha numeric strings removed
Convention: INVERSE
Protocol: T=0
TA1 = 13
TB1 = 25
TC1 = 02
Historical Bytes: alpha numeric strings removed
Programming Voltage = 5.0 volts
Programming Current = 50ma
Maximum Clock Frequency = 5.0MHz
Assuming a 3.5790MHz clock:
Work ETU = 0.0000259849 seconds
Guard Time = 0.0003637887 seconds
Baud Rate After Reset = 38484

Please if someone have any NDS experience please reply.

thanks a lot.

Juliano
 
mhku

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#2
Is your question that the card doesn't work in either box? Or it works in one but you cannot share it to the other?

Have you tried CCcam? Sorry, can't help with the CAID part.

If this turns into a Dreambox thread I'll move it to the Dreambox section.
 
Lucas

Lucas

Specialist Contributor
Messages
2,258
Likes
0
My Satellite Setup
Dreambox7020
My Location
Mars
#3
mhku said:
Is your question that the card doesn't work in either box? Or it works in one but you cannot share it to the other?

Have you tried CCcam? Sorry, can't help with the CAID part.

If this turns into a Dreambox thread I'll move it to the Dreambox section.
Hi mhku, i had spoke to him before (PM), and he wants to put the SKY Brazil Oficial Card to work in a Dreambox. And i sugest ho him to post here, but he did in a worng seccion. I think is better move to a dreambox seccion.
Thanks and sorry my bad english.
 
J

jruthes

Member
Messages
8
Likes
0
My Satellite Setup
Dreambox 500s and
Dreambox 7000s with
Official Sky Brazil Card (NDS Videoguard)
CaID 0907 and 0942
My Location
BR
#4
mhku said:
Is your question that the card doesn't work in either box? Or it works in one but you cannot share it to the other?

Have you tried CCcam? Sorry, can't help with the CAID part.
I can´t get it work on both db. I tried with a lot of different firmwares like Gemini, Pli Garnet, etc.

Probably it´s because gbox / newcs didn´t recognize ATR of this card.

Can someone confirm this supposition?

Thanks.

Juliano
 
mhku

mhku

Super Moderator
Staff member
Messages
4,712
Likes
20
My Satellite Setup
TM Nano ~ sg2100
My Location
Midlands
#5
Have you tried CCcam?

( Cheers Lucas :) )
 
J

jruthes

Member
Messages
8
Likes
0
My Satellite Setup
Dreambox 500s and
Dreambox 7000s with
Official Sky Brazil Card (NDS Videoguard)
CaID 0907 and 0942
My Location
BR
#6
mhku said:
Have you tried CCcam?

( Cheers Lucas :) )
I have tried, but enters in a loop.

22:19:59.287 CCcam: ======================================================================
22:19:59.290 CCcam: starting CCcam 1.7.0 compiled on Mar 18 2007@20:02:49
22:19:59.290 CCcam: ======================================================================
22:19:59.291 CCcam: online using nodeId 6274bcf813441db8
22:19:59.306 CCcam: dvb api1 detected
22:19:59.308 CCcam: DM70x0 detected
22:19:59.309 CCcam: create 2 cam device(s)
22:19:59.727 CCcam: nds card found
22:20:01.990 CCcam: irdeto card found
22:20:03.011 CCcam: card added to broker with caid 622
22:20:06.852 CCcam: nds card found
22:20:10.256 CCcam: nds card found
22:20:13.661 CCcam: nds card found
22:20:17.065 CCcam: nds card found
22:20:20.470 CCcam: nds card found

My irdeto card works, but NDS does´t.

I read gbox readme file and gbox was tested just on UK card Provider 0960

*6MHz test* ECM test EMM test
---------------------------------------------------------
NDS original (provider: 0960) OK OK OK
---------------------------------------------------------

Probably mine card Provider 0907/0942 is not compatible.

Using newcs 1.20 enters in a loop too.

[ 23:20:05 ] [ Box detect ] Box type 2
[ 23:20:05 ] [ Config ] Option <Seca-PPV> for device 0 (lower) not present, defaulting to NO
[ 23:20:05 ] [ Config ] /dev/sci0 ECM priority: round
[ 23:20:05 ] [ Config ] Option <Seca-PPV> for device 1 (upper) not present, defaulting to NO
[ 23:20:05 ] [ Config ] Option <mhz> for device 1 (upper) not present, defaulting to 357
[ 23:20:05 ] [ Config ] /dev/sci1 ECM priority: round
[ 23:20:05 ] [ Config ] Option <spider> not present for User: dummy, defaulting to NO
[ 23:20:05 ] [ Config ] Option <spider> not present for User: User1, defaulting to NO
[ 23:20:05 ] [ Config ] Option <spider> not present for User: User2, defaulting to NO
[ 23:20:05 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 23:20:05 ] [ ECM Cache ] Initialising Cache with 10 entries
[ NewCS ] Process ID is: 462
[ 23:20:05 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 23:20:05 ] [ Sci ] Opening device /dev/sci0
[ 23:20:16 ] [ ATR ] T=0 1etu=93.00us Guardtime:14etu WWT:38400etu
[ 23:20:16 ] [ ATR ] Historical bytes: @ [B0] [12] i [FF] J P [90] G L [00] [00] [00] [00] [00]
[ 23:20:16 ] [ Loader ] Init NDS card
[ 23:20:18 ] [ Loader ] Card 0900 on port /dev/sci0 failed
[ 23:20:18 ] [ Loader ] Starting Newcamd Server on port 34000
[ 23:20:18 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 23:20:34 ] [ Newcamd ] recv: error! 113: No route to host
[ 23:20:34 ] [ Newcamd:34001 ] User User2 logout
[ 23:20:34 ] [ Loader ] Reinit card with caid 0900
[ 23:20:39 ] [ Loader ] Reinit card with caid 0900
[ 23:20:48 ] [ Loader ] Reinit card with caid 0900
--------------- LOOP ----------------------------

Does anyone know if it´s possible to ask Gbox or NewCS Team to add support to this provider 0907/0942?

Thanks a lot.

Juliano
 
P

prwoolfall

Member
Messages
9
Likes
0
My Satellite Setup
Dreambox - Home Network of three.
My Location
Qatar &amp; Turkey (UK sometimes)
#7
Did you ever get your card to work?

I have the same problem with another countries SKY card.
 
S

shanek

Member
Messages
8
Likes
0
My Satellite Setup
DreamBox DM500
My Location
NZ
#8
I have a similar problem my Sky card was working fine for a couple of months but then just stopped, the card works fine in the Sky box but nolonger works in my dreambox dm500. Its a Sky New Zealand Card.
I have been using CCCam 2.0.0 and 2.0.9 and both use to work fine.

The log messages from syslog show

CCCam: NDS card found

Which tells me the card is still being read OK and

CCCam: EMM: not interested in 096A:000000
CCCam: EMM: not interested in 0969:000000

Which is detail from the card but CCCam is saying its not going to use this card to decode the channel.

Any help would be great as it use to work and i didnt change anything and it just stopped.

I have a DM500
PLI image (Latest)
CCCam 2.0.9
 
S

shanek

Member
Messages
8
Likes
0
My Satellite Setup
DreamBox DM500
My Location
NZ
#9
i have added additional CCCam logging and it is also saying

CCCam: card init fail

each time after

CCCam: NDS card found

Is there any way i can log more detail or try an init the card manualy from the command line to see if i get more error information ?

Thanks'
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
Likes
8
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR &amp; DM 800 HD ---
Motek SG2100 &amp; Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full &amp; 24&quot; Apple iMAC ----
My Location
/var/tuxbox/config
#10
Details of the contents of your CCcam.cfg would be helpfull here. Don't include any share details ofcourse , just basic settings you are using.
 
N

nicoquille

Member
Messages
1
Likes
0
My Satellite Setup
Polsat/Dm800
My Location
France
#11
shanek said:
i have added additional CCCam logging and it is also saying

CCCam: card init fail

each time after

CCCam: NDS card found

Is there any way i can log more detail or try an init the card manualy from the command line to see if i get more error information ?

Thanks'
Hello.
Did you finally solve your problem because I'm experiencing the same issue with my polsat card:
CCcam: nds card found
CCcam: card init fail
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
Likes
8
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR &amp; DM 800 HD ---
Motek SG2100 &amp; Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full &amp; 24&quot; Apple iMAC ----
My Location
/var/tuxbox/config
#12
Are any of you using CCcam 2.1.0 yet ? This latest version offers some improvments in compatibility.
 
S

shawnw

Member
Messages
1
Likes
0
My Satellite Setup
DM500s
My Location
New Zealand
#13
Shanek did you get Sky NZ working if you did can you tell me how
 
S

satelliteNOOB

Member
Messages
6
Likes
0
My Satellite Setup
strong srt 4658x with dragon cam and a dreambox dm500s with CCcam, newcamd
My Location
new zealand
#14
shawnw im from nz as well
 
B16MCC

B16MCC

Dreambox Gimp & Coder
Messages
1,562
Likes
8
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR &amp; DM 800 HD ---
Motek SG2100 &amp; Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full &amp; 24&quot; Apple iMAC ----
My Location
/var/tuxbox/config
#15
In light of how the new sly uk card works guys I would recommend you read the very long thread concerning that and look to use NewCS to see if it can help you.
 
T

thiagodp

Member
Messages
2
Likes
0
My Satellite Setup
...
My Location
Belém
#16
Você conseguiu parear a DM500s com o GL23??

long quote removed - admin
 
Analoguesat

Analoguesat

Administrator
Staff member
Messages
46,029
Likes
8,550
Location
Scottish Borders
My Satellite Setup
TM 5402HD
Skybox F3
Sky+ UK.
My Location
Scottish Borders
#17
thiagodp said:
Você conseguiu parear a DM500s com o GL23??

Você deve postar em Inglês neste fórum. A tradução do Google é suficiente

You must post in English on this forum. A Google translation is sufficient
 
Top